Precision CNC Collet Chuck Sets | Custom ER Collet Nuts Made in China
OpeningYour toolholder is only as accurate as the weakest interface. We machine ER collet nuts and collet chucks to your exact drawing, not to a generic catalog spec. Every thread, every taper, every
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your toolholder is only as accurate as the weakest interface. We machine ER collet nuts and collet chucks to your exact drawing, not to a generic catalog spec. Every thread, every taper, every relief angle is cut to your print. Before any batch ships, we verify critical dimensions on a CMM and record the results.
At a glance: Tolerance ±0.005 mm on thread pitch and taper angle. Lead time 7–12 days for standard sizes, 15 days for custom profiles. No MOQ. Batch traceability via heat number and machining lot code.
Carburized to HRC 58–62 (case depth 0.4–0.8 mm) or induction hardened
Thread types
ER11, ER16, ER20, ER25, ER32, ER40 (metric or inch)
Tolerance
Thread pitch ±0.005 mm, taper angle ±0.01°, concentricity ≤0.005 mm
Surface finish
Ra 0.4 µm on taper, Ra 0.8 µm on OD, black oxide or TiN coating optional
Machining process
5-axis CNC turning, CNC milling, precision grinding for final OD
Inspection
100% thread gauge check, CMM report for taper and runout per batch
Batch size
1 piece to 10,000 pieces, no MOQ
Lead time
7–12 days standard, 15 days for complex custom profiles
Origin
Made in China, Dongguan factory, 20 years export experience
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each bar stock has a heat number. Each machined part gets a lot code stamped on the non-functional face. If a problem appears in your assembly line, you can trace it back to the exact batch, machine, and operator. We keep records for 5 years.
2. Inspection report per batch. You get a dimensional report with every shipment. It lists thread pitch, taper angle, hardness, and surface finish for each lot. No vague "certificate of conformance." You see the actual measured values. If you need a full PPAP or material cert, we provide that too.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck assembly may need a spring, a stamped retainer, or a heatsink for a high-speed spindle. Instead of coordinating three suppliers, you send us one drawing package. We machine the nut, stamp the washer, wind the spring, and extrude the heatsink under one roof. One PO, one quality system, one shipping date.
Where these parts are used
Our custom CNC collet chucks and ER collet nuts run in real production environments:
CNC milling spindles – ER25 and ER32 nuts for tool retention in vertical and horizontal machining centers.
CNC lathes – ER16 and ER20 collet chucks for bar feeding and second-operation workholding.
Automatic tool changers – Precision ground ER collet nuts with pull studs for ATC magazines.
High-speed engraving – ER11 collet chucks for PCB drilling and small-diameter end mills, where runout below 0.005 mm is mandatory.
Robotic deburring cells – Custom-length collet chucks for abrasive tools and mounted points.
Medical device machining – Stainless ER collet nuts for cleanroom environments, where material certs and surface finish are audited.
We also make non-standard variants: extended-length nuts, slotted nuts for coolant through-spindle, and nuts with special drive flats for automated tightening.
Q: What is your MOQ?
A: No MOQ. We accept a single piece for prototype validation. For production runs, we offer tiered pricing at 50, 200, and 500 pieces. You pay for the first article, not for a minimum batch.
Q: How do you guarantee tolerance and quality?
A: We cut threads with single-point CNC turning, not taps, so pitch accuracy is consistent. Every part passes a go/no-go thread gauge. Taper angle is checked on a CMM with a 0.5 µm resolution probe. We send the inspection report with the shipment. If any part fails your incoming check, we replace it at no cost.
Q: What is your lead time for a custom CNC collet chuck?
A: Standard ER sizes with common materials ship in 7–12 days. Custom profiles with special hardening or coating take 15 days. For urgent tooling breakdowns, we can expedite a single piece in 72 hours at a 20% surcharge.
Q: Do you provide material certificates and heat treatment reports?
A: Yes. We supply mill certificates for the raw material, heat treatment curves, and hardness test reports. For medical or aerospace applications, we provide full traceability from melt to final grind.
Send your drawing
Send us your 2D or 3D file. We will review the tolerances, material, and coating, then send a firm quote within 12 hours. No obligation, no design fee for standard modifications.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is not a slogan. It is a measurement. We prove it with every batch.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.