OpeningYour drawing is the starting point. We turn it into a stamped part that meets your tolerance stack-up, flatness spec, and surface finish—verified before shipment.This collection covers mounting
Your drawing is the starting point. We turn it into a stamped part that meets your tolerance stack-up, flatness spec, and surface finish—verified before shipment.
This collection covers mounting plates, flanges, and brackets produced on high-speed presses and CNC-controlled stamping lines. We do not sell off-the-shelf blanks. Every piece is made to your print.
| Parameter | Value |
|---|---|
| Materials | SPCC, SECC, SGCC, SUS301/304/430, aluminum 5052/6061, brass, copper, cold-rolled steel |
| Thickness range | 0.3 mm – 6.0 mm |
| Press capacity | 25T – 400T mechanical and servo presses |
| Process | Progressive die stamping, compound die stamping, deep drawing, bending, coining, deburring |
| Tolerance | ±0.05 mm on hole positions and formed edges; ±0.1 mm on bend angles |
| Surface finish | As-stamped, zinc plating, nickel plating, powder coating, anodizing, passivation |
| Flatness | ≤0.2 mm per 100 mm length (after stress relief if required) |
| Batch size | No MOQ – prototype to high-volume production |
| Inspection | First article inspection (FAI) per batch, in-process SPC, final dimensional report |
| Lead time | Prototype: 10–15 days; production: 20–25 days after drawing approval |
| Certifications | ISO 9001:2015, IATF 16949 (automotive line), material certificates available |
1. Batch-traceable quality. Each lot gets a unique job number. We record the coil heat number, press settings, tool wear checks, and operator ID. If a part fails in your line, we trace it back to the exact shift and machine within 24 hours. No guesswork.
2. Inspection report per batch. You receive a dimensional report with CMM data for critical features, hardness test results, and surface roughness readings. We do not ship a batch without a signed quality document. This is standard, not a paid extra.
3. One factory for CNC + stamping + springs + heat sinks. Your mounting plate may need a tapped hole, a spring clip, or a heat sink attached. We do all of it under one roof. You avoid multi-vendor coordination, shipping delays, and tolerance mismatches between parts. This is precision manufacturing with a single point of responsibility.
Stamped mounting plates and flanges are structural and positioning components. Typical applications include:
These parts carry loads, locate components, and absorb vibration. That is why we control hole position and flatness tightly. A 0.1 mm error in a mounting hole causes bolt misalignment and premature wear in your assembly.
Looking for a different part? We also machine Precision Stainless Steel Stamped Corner Brackets | Custom Metal Stamping China in the same Dongguan factory.
Q: Do you really have no MOQ? A: Yes. We run prototypes from 50 pieces. For production, we quote per piece based on your annual volume. Tooling cost is amortized into the piece price or quoted separately—your choice.
Q: How do you guarantee tolerance and quality? A: We use progressive dies with precision pilots. First article is measured on a CMM and compared to your drawing. During production, we check every 200th piece for critical dimensions. The final batch inspection report is included with shipment.
Q: What is the lead time for a stamped part? A: Prototype tooling (simple form dies) takes 7–10 days. Production tooling (multi-stage progressive dies) takes 15–20 days. First samples are sent within 3 days after tooling is ready. For repeat orders, production starts within 5 days of PO confirmation.
Q: Do you provide material certificates? A: Yes. Every batch ships with a mill certificate for the raw material, including chemical composition and mechanical properties. If your drawing calls for a specific standard (e.g., JIS G3141, ASTM A1008), we source that grade and provide the cert.
Send us your 2D or 3D file (PDF, DWG, STEP, or IGES). We will review the geometry, suggest material and thickness if not specified, and return a firm quote within 12 hours.
No MOQ. No hidden tooling fees. Precision manufacturing, made in China, with full traceability.
Email: sc@bquq.com WhatsApp: +86 13713157787
Your drawing is the only thing we need to start.
| Parameter | Capability |
|---|---|
| Materials | SPCC, SGCC, SUS301/304/316, brass, copper, beryllium copper, phosphor bronze |
| Process | Progressive die stamping, fine blanking, deep drawing, bending, tapping |
| Tolerance | ±0.01mm standard, ±0.005mm on request |
| Surface | Zinc plating, nickel, tin, gold, powder coating, passivation, anodizing |
| Die Size | Up to 1200 x 800 mm, 16-250 ton presses |
| Thickness | 0.05 - 6.0 mm sheet metal, wire 0.1 - 8.0 mm |
| Prototype | 7-15 days tooling, no MOQ on samples |
| Inspection | Full report per batch, CMM and optical measurement |
