Custom Extruded Heat Sinks with Spring Clip | Precision Manufacturing
OpeningYou send the drawing. We build the heat sink.Your custom extruded heat sink with spring clip is machined to your exact dimensions, then verified before shipment. No surprises. No rework on your
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your custom extruded heat sink with spring clip is machined to your exact dimensions, then verified before shipment. No surprises. No rework on your line.
Tolerance: ±0.05 mm on critical mounting surfaces
Lead time: 10–15 working days for prototypes, 20–25 for production runs
No MOQ — order 1 piece or 10,000
Material: Aluminum 6063-T5 or 6061-T6, per your spec
Surface: Clear anodize, black anodize, or as-drawn
We are a precision manufacturing factory in Dongguan, China, with 20 years on CNC machining, metal stamping, springs, and heat sinks. One factory. One responsible team.
Deburring, chamfering, thermal interface material (TIM) application
Inspection
100% dimensional check on critical features, CMM report per batch
Batch size
No MOQ — prototype to high volume
Lead time
10–15 days prototype, 20–25 days production
Packaging
Anti-static foam, individual slots, export carton
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every heat sink gets a unique batch number. We track material lot, machine operator, and inspection results. If a problem shows up on your line, we trace it in minutes, not days.
2. Inspection report per batch
You get a full dimensional report with every shipment. Critical features — clip slot width, mounting hole position, flatness — are measured and recorded. You do not need to re-inspect on arrival. Trust, but verified.
3. One factory for CNC + stamping + spring + heat sink
Your heat sink has a spring clip. The clip is stamped. The spring is formed. The base is extruded and machined. Most suppliers outsource two or three of these steps. We do all of them in-house. That means fewer handoffs, tighter tolerances, and one point of contact for quality.
Where these parts are used
Extruded heat sinks with spring clips are standard in power electronics.
IGBT modules — clip holds the module against the sink, no screws needed, faster assembly
DC-DC converters — low profile, high fin density for forced air cooling
LED drivers — aluminum base with clip for easy field replacement
Motor controllers — vibration-resistant clip keeps contact pressure constant
Q: What is your MOQ?
A: No MOQ. We make 1 prototype for your test, or 10,000 for production. Same quality system, same inspection.
Q: What tolerance can you hold on the clip slot?
A: ±0.05 mm on the slot width and depth. The clip is stamped to ±0.03 mm. We verify both with a go/no-go gauge before packing.
Q: What is your lead time for a production order?
A: 20–25 working days after drawing approval. Prototypes in 10–15 days. If you need faster, tell us — we can split the batch and ship partials.
Q: Do you provide material certificates?
A: Yes. Mill certificates for aluminum and stainless steel come with every batch. Anodize thickness reports are included on request.
Send your drawing
Stop waiting on slow quotes. Send us your 2D or 3D drawing today.
We reply with a firm quote in 12 hours — price, lead time, and any design suggestions for manufacturability. No obligation. No pressure.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Custom heat sinks, made in China, with precision manufacturing you can verify. Send the drawing. We will handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.