OpeningYour torsion spring design is unique. We make it exactly to your drawing—no interpretation, no shortcuts. Every brass buckle shaft torsion spring is verified for wire diameter, coil count, free
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your torsion spring design is unique. We make it exactly to your drawing—no interpretation, no shortcuts. Every brass buckle shaft torsion spring is verified for wire diameter, coil count, free angle, and leg position before shipment.
We are BQUQ, a precision manufacturing factory in Dongguan, China. We have run CNC, stamping, spring, and heat sink lines for 20 years. This is not a trading desk. We cut wire, wind coils, and grind ends on our own floor.
Tolerance: ±0.05 mm on critical dimensions (per DIN 2095 grade 2)
Lead time: 7–12 days for prototypes, 15–20 days for production
No MOQ: order 10 pieces or 100,000 pieces
Material: brass (C2680, C2600, H65, H62) or your specified alloy
Inspection: 100% critical dimension check, batch report included
Dimensional report, load test, material cert, surface check—sent with every shipment
All springs are made in China at our Dongguan facility. We do not outsource. You get one quality standard, one responsible party.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality, not random luck.
We assign a unique batch number to every order. The wire lot, machine settings, heat treatment temperature, and inspection results are linked to that number. If you need to audit or trace a part six months later, we can pull the full record in minutes. This matters for automotive, medical, and lock applications where a failed spring is a liability.
2. Inspection report per batch—free, no negotiation.
Every batch ships with a dimensional report. We measure wire diameter, free angle, coil gap, leg position, and spring rate. For critical springs, we include a load-deflection curve. You do not have to ask. It is standard. If you want third-party inspection (SGS, TUV), we arrange it at cost.
3. One factory for CNC + stamping + spring + heat sink.
Your brass buckle shaft torsion spring often sits next to a stamped bracket, a CNC-machined shaft, or a heat sink. We make all of them under one roof. That means one purchase order, one set of tolerances, one shipping date. No coordination headaches between three suppliers. No finger-pointing when a part does not fit.
Where These Parts Are Used
Brass buckle shaft torsion springs are not decorative. They are functional, load-bearing components in tight spaces.
Belt buckles and tactical gear: Return action for the buckle tongue, repeated cycling, corrosion resistance from brass.
Locks and latches: Door locks, cabinet locks, padlocks—where the spring must hold tension for years without relaxing.
Automotive interior: Seat belt buckles, glove box latches, mirror adjustment mechanisms. Brass resists moisture and salt better than plain carbon steel.
Electrical enclosures: Hinges and lid return mechanisms on control boxes, where non-magnetic and non-sparking properties are required.
Medical devices: Small instrument handles and clip mechanisms where brass’s biocompatibility and clean surface finish are valued.
Furniture hardware: Folding table locks, chair tilt mechanisms, and drawer catches that need quiet, smooth return motion.
If your application is not listed, send the drawing anyway. We have made torsion springs for drone gimbals, vending machine coin mechanisms, and even aerospace test fixtures.
Q: What is your MOQ?
A: No MOQ. We accept 10-piece prototype orders and 100,000-piece production runs. Prototype pricing is slightly higher per piece, but tooling is free for standard wire diameters. If you need a custom wire size, we will quote the die cost separately.
Q: What tolerance can you hold on torsion springs?
A: Standard is DIN 2095 grade 2: ±0.05 mm on wire diameter and ±5% on spring rate. For critical applications, we hold grade 1: ±0.03 mm and ±3%. We verify with a digital force gauge and optical measuring projector. If your drawing specifies tighter, we will tell you if it is feasible before you pay.
Q: What is your lead time?
A: Prototypes: 7–12 days from drawing approval. Production: 15–20 days. For urgent orders, we can rush prototypes in 3 days at a 20% surcharge. We ship via DHL, FedEx, or sea freight—your choice.
Q: Do you provide material certificates?
A: Yes. Every batch includes a mill certificate for the brass or steel wire, showing chemical composition and mechanical properties. If you need a full EN 10204 3.1 certificate, we arrange it with the wire mill at no extra cost for orders above 500 kg.
Send Your Drawing
Stop guessing if your spring will fit. Send us your drawing—PDF, STEP, IGES, or even a hand sketch with dimensions. We will check the design for manufacturability, suggest material if you are unsure, and send a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
No MOQ. No minimum order fee. No sales pressure. Just a precise quote from a precision manufacturing engineer who has wound millions of springs.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.