Precision Steel Torsion Spring Collection | Custom Made in China
OpeningSend us your drawing. We build the steel torsion spring exactly to your print—wire diameter, coil count, leg length, and wind direction. Every spring is verified before shipment. We do not gues
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Send us your drawing. We build the steel torsion spring exactly to your print—wire diameter, coil count, leg length, and wind direction. Every spring is verified before shipment. We do not guess.
At a glance: Tolerances down to ±0.05 mm on wire diameter and ±1° on leg angle. Lead time 7-15 days for prototypes. No MOQ. 100% inspection report included with every batch.
We are a precision manufacturing factory in Dongguan, China. 20 years in the business. Our CNC, stamping, spring, and heat sink lines run under one roof. You get one supplier, one quality standard, one invoice.
Specifications
Parameter
Value
Materials
Spring steel (EN 10270-1 DH), stainless steel (302, 316, 17-7 PH), music wire (ASTM A228), oil-tempered chrome silicon (ASTM A401)
Wire diameter
0.1 mm – 12.0 mm
Max coil diameter
80 mm
Max free length
200 mm
Process
CNC coiling (automatic), hot coiling for heavy wire, stress-relieving oven, shot peening (optional)
Tolerance
Wire diameter ±0.05 mm; free length ±0.5 mm; leg angle ±1°; coil diameter ±0.2 mm
Surface finish
Plain, zinc plated (clear or yellow), nickel plated, powder coated, black oxide
Ends
Closed, open, ground, short hook, long hook, special bends per drawing
Batch size
1 piece to 1,000,000 pieces. No MOQ for prototypes.
Inspection
Load testing (force at specified deflection), dimensional CMM check, hardness test (HRC), surface defect check
Documentation
Material certificate (EN 10204 3.1), batch traceability code, inspection report per batch
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality. Every coil of wire we use carries a heat number. We record it against your batch number. If a problem appears in your assembly line six months from now, we trace it back to the exact material and machine settings. No guesswork.
2. Inspection report per batch. You do not have to ask. Every shipment includes a report with measured values: wire diameter, free length, load at deflection, and surface condition. Our QC team uses calibrated digital force testers and optical comparators. We sign it. You trust it.
3. One factory for CNC + stamping + spring + heat sink. Your torsion spring often sits next to a stamped bracket or a CNC-machined shaft. If we make all of them, tolerances match. Lead times shrink because parts travel between machines, not between countries. You deal with one engineer, not four.
Where These Parts Are Used
Custom steel torsion springs are not off-the-shelf items. They are engineered for a specific load and space envelope. Typical applications from our current orders:
Automotive – clutch return springs, throttle return springs, seat belt retractor mechanisms, door hinge counterbalance springs.
Industrial equipment – safety interlocks on presses, gate return mechanisms, conveyor belt tensioners, valve actuation.
Consumer appliances – washing machine lid hinges, oven door counterbalance, vacuum cleaner brush roll tension.
Medical devices – surgical instrument handles, IV pump mechanisms, adjustable hospital bed latches.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your testing or one million for production. Tooling is minimal for springs—we set up the coiling machine from your wire diameter and spring index. Prototype lead time is 7 days.
Q: How do you guarantee tolerance and quality?
A: We start with the material certificate. Then we set the coiling machine to your wire diameter and measure the first piece. After stress-relieving, we test load at your specified deflection. Every batch gets a final dimensional check on a CMM. The inspection report goes out with the shipment.
Q: What is your lead time for production?
A: Prototypes: 7-15 days. Production orders: 15-25 days depending on quantity and surface finish. For urgent needs, tell us your deadline. We run three shifts and can split your order across two spring lines.
Q: Do you provide material certificates?
A: Yes. Every batch ships with a material certificate per EN 10204 3.1. If you need a specific standard—ASTM, DIN, JIS—we source the wire accordingly and document it.
Send Your Drawing
Stop searching for a generic spring. Send us your print, your CAD file, or even a hand sketch with dimensions. We will respond with a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Include your wire diameter, number of coils, leg configuration, and required load. If you are unsure about the design, our engineers will suggest adjustments for manufacturability—at no cost. Precision manufacturing, made in China, no MOQ. Your drawing is the starting point.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.