This collection covers perforated stamped metal plates and mesh produced on 20-year-old CNC stamping lines in our Dongguan factory. You get hole diameters from 0.8mm to 12mm with p
This collection covers perforated stamped metal plates and mesh produced on 20-year-old CNC stamping lines in our Dongguan factory. You get hole diameters from 0.8mm to 12mm with positional accuracy h
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
This collection covers perforated stamped metal plates and mesh produced on 20-year-old CNC stamping lines in our Dongguan factory. You get hole diameters from 0.8mm to 12mm with positional accuracy held to ±0.05mm, flatness within 0.1mm per 100mm, and a surface finish of Ra 1.6. Lead time is 15 days for standard tooling, and we ship with a hardness range of 38–45 HRC for stainless grades.
How We Hold Hole Position to ±0.05mm Across Large Panels
We use progressive dies with pilot pins that re-register the strip at every station. This eliminates cumulative error that open-tolerance stampers accept. For panels over 300mm wide, we add a secondary CNC coining pass to correct any thermal distortion from the stamping hit. The result is a hole pattern that matches your CAD file within 0.05mm true position, verified on a CMM with a 0.001mm resolution probe.
Die Steel Selection and Hardness for Long-Run Consistency
Our stamping dies are cut from D2 tool steel, hardened to 60–62 HRC, then cryogenically treated to −120°C. This removes retained austenite, so the die edges do not micro-crack after 100,000 hits. For abrasive materials like 304 stainless or galvanized steel, we apply a titanium nitride coating on the punch faces. This extends die life to 500,000 strokes before you see any burr height increase above 0.05mm.
Materials We Stock for Perforated Mesh and Plate Orders
We keep coils of 304, 316L stainless, cold-rolled steel (SPCC), and aluminum 5052 in thicknesses from 0.3mm to 3.0mm. For acoustic panels, we offer copper and brass in 0.5mm and 0.8mm. All coils come with mill certificates traceable to the heat number. If you need a specific alloy like 17-4PH, we can procure it with a 5-day lead time added to the standard 15-day stamping schedule.
Inspection Before Every Shipment: CMM, Vision System, and Burr Check
Every batch goes through a three-stage check. First, a vision system with a 5MP camera measures hole diameter and pitch across 20 random locations per panel. Second, a coordinate measuring machine checks true position on critical holes that mate with fasteners. Third, we measure burr height with a digital micrometer at the edges of each hole—acceptance limit is 0.05mm maximum, but our average is 0.02mm. We include a PDF inspection report with every shipment.
Surface Finish Options: From Raw Stamped to Powder Coated
As-stamped parts come off at Ra 1.6 on the flat areas and Ra 3.2 inside the holes. If you need lower friction for sliding applications, we can add a vibratory deburring pass that brings the entire surface to Ra 0.8. For outdoor enclosures, we offer powder coating in RAL colors at 60–80 microns thickness. Electropolishing for stainless mesh is available too, achieving a mirror finish at Ra 0.2.
Tooling Cost and How We Keep It Low for Prototypes and Small Runs
For prototype quantities under 500 pieces, we use wire-cut EDM to produce a single-station tool that costs $800–$1,500 depending on hole count. For production runs above 5,000 pieces, a progressive die costs $3,000–$8,000 but amortizes to less than $0.01 per part. We do not charge a separate tooling fee if your order quantity exceeds 20,000 pieces per year—the die cost is absorbed into the piece price.
Packaging and Export for Global Shipments from Dongguan
Panels are interleaved with kraft paper and stacked on wooden pallets that meet ISPM-15 heat treatment standards for export. Small mesh sheets go into corrugated cartons with foam edge protectors. We ship via sea freight from Shenzhen port (FOB or CIF) or via air express with DHL/UPS for urgent orders under 50kg. Average transit time to the US West Coast is 12 days by sea, 3 days by air.
Specification
Value
Material grades
304, 316L, SPCC, 5052, copper, brass
Sheet thickness range
0.3mm – 3.0mm
Hole diameter range
0.8mm – 12mm
Hole positional tolerance
±0.05mm
Flatness (per 100mm)
0.1mm
Hardness (stainless)
38–45 HRC
Surface finish (as stamped)
Ra 1.6
Burr height
≤0.05mm
Max panel size
600mm × 1200mm
Lead time (standard tooling)
15 days
MOQ
No MOQ
Packaging
ISPM-15 wooden pallets / export cartons
FAQs on Perforated Stamped Metal Plates Mesh Collection
What is the minimum order quantity?
There is no MOQ—you can order a single prototype panel for testing, and we will apply the same inspection standards as a production run.
Can you customize hole shape and pattern layout?
Yes, we cut any custom shape—round, square, slotted, hexagonal—and arrange them in staggered, straight, or custom CAD-defined patterns with the same ±0.05mm tolerance.
How do you verify quality on small batches?
Even for a 10-piece order, we run the full vision and CMM inspection on every single panel, not just a sample, and email you the report before packing.
What is the typical lead time for a repeat order?
Repeat orders with existing tooling ship in 10 days; first-time orders with new tooling take 15 days, plus 3–5 days for shipping depending on your destination.
Send your drawing for a firm quote within 12 hours. Email sc@bquq.com or WhatsApp +86 13713157787. We reply with pricing, tooling cost, and a delivery date—no generic promises. This is precision manufacturing made in China, but with a no-MOQ policy that lets you test before you commit to volume.
