Precision Stamped EMI Shielding Cans | Custom Metal Stamping No MOQ
OpeningYour drawing defines the part. Our press defines the tolerance. We build EMI shielding cans exactly to your CAD file, then verify every critical dimension before the batch leaves our floor. No
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our press defines the tolerance. We build EMI shielding cans exactly to your CAD file, then verify every critical dimension before the batch leaves our floor. No guesswork, no second-guessing.
At a glance: ±0.05 mm stamping tolerance, 0.1 mm to 2.0 mm material thickness, 7-day standard lead time, no MOQ, 100% dimensional inspection on first articles and batch sampling per AQL 2.5.
Prototype: 3-5 days; production: 7-15 days after tooling approval
Inspection
First article inspection (FAI) with CMM, in-process checks every 2 hours, final AQL 2.5 sampling
Certifications
ISO 9001:2015, material certificates (mill test reports) on request
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every lot gets a unique job number. We record material heat number, press settings, die maintenance date, and inspector ID. If a problem shows up at your assembly line, we trace it back to the exact shift and machine in minutes. You get a full traceability report with every shipment.
2. Inspection report per batch. We do not ship blind. Each batch includes a dimensional report with measured values on all critical features—not just a pass/fail stamp. For high-volume runs, we provide X-bar and R charts on key dimensions. You know exactly what you are receiving before the truck arrives.
3. One factory for CNC + stamping + springs + heat sinks. Your EMI shield often needs a stamped frame, a CNC-machined heat sink, and a spring clip. Sending all four parts to one factory cuts your logistics cost, shortens your lead time, and eliminates tolerance mismatch between mating parts. We have all four lines under one roof in Dongguan, China.
Where these parts are used
EMI shielding cans are not exotic. They are everywhere electronics live.
Telecom base stations: shielding RF modules and power amplifiers from cross-talk.
Automotive ECUs: protecting engine control units from electromagnetic interference in high-vibration environments.
Medical devices: isolating sensitive sensor circuits in patient monitors and imaging equipment.
Consumer electronics: covering Wi-Fi modules, Bluetooth chips, and audio amplifiers in smartphones, laptops, and smart TVs.
Industrial drives: shielding variable frequency drives and servo controllers from noise.
LED lighting drivers: containing high-frequency switching noise that can disrupt nearby circuits.
Most of these parts are small—20 mm to 80 mm square—with multiple bends, dimples, and mounting tabs. Our progressive dies handle these features in a single pass, holding ±0.05 mm across all bend lines.
Q: What is your MOQ?
A: Zero. No MOQ. We run one prototype for your validation, or we run a million pieces for your production line. Tooling cost is quoted separately for new dies; for existing die families, we often reuse tooling to save you money.
Q: How do you guarantee tolerance and quality?
A: We use CMM for first article inspection and pin gauges for hole positions on every batch. In-process checks happen every two hours on the press line. Final inspection follows AQL 2.5, with critical dimensions measured 100% on every part if your drawing specifies it.
Q: What is your typical lead time?
A: Prototype stamping: 3-5 days from drawing approval. Production: 7-15 days, depending on quantity and secondary operations. Tooling fabrication adds 10-15 days for new dies. We ship worldwide via DHL, FedEx, or sea freight—your choice.
Q: Do you provide material certificates?
A: Yes. Every batch ships with a mill test report from the steel supplier, showing chemical composition and mechanical properties. We also provide RoHS and REACH compliance documentation on request.
Send your drawing
Stop emailing three suppliers and hoping one gets it right. Send us your CAD file, your material spec, and your annual volume. We reply with a firm quote in 12 hours—price, tooling cost, lead time, and delivery terms.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, custom metal stamping, made in China—with the documentation to prove it. Your drawing is the only thing we need to start.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.