Precision Stamped Flat Springs | Custom Metal Stamping Made in China
OpeningYour flat spring design is not a catalog item. It is a solution to a specific mechanical problem—a force curve, a fatigue life, a space constraint. We build it exactly to your drawing, and we v
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your flat spring design is not a catalog item. It is a solution to a specific mechanical problem—a force curve, a fatigue life, a space constraint. We build it exactly to your drawing, and we verify every critical dimension before the batch leaves our floor.
We are BQUQ, a precision manufacturing factory in Dongguan, China. Our metal stamping line has run for 20 years. We do not guess. We measure.
At a glance: ±0.01 mm tolerance on critical features, 7-day standard lead time, no MOQ, full material traceability.
First article inspection (FAI) per batch, dimensional report included
Lead time
Prototype: 3-5 days; production: 7-15 days after tooling approval
MOQ
No MOQ. You order what you need.
All springs are produced on high-speed presses (up to 600 strokes per minute) with in-die sensors for real-time quality monitoring. We hold hardness values within ±2 HRC where specified.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every coil of material we buy comes with a mill certificate. Every batch of springs gets a unique lot number. If a problem appears in your assembly line six months from now, we can trace that lot back to the exact material heat, the exact die, and the exact operator shift. No ambiguity.
2. Inspection report per batch. You do not have to trust our word. Each shipment includes a dimensional inspection report with actual measured values—not just a pass/fail checkbox. We measure flatness, thickness, hole positions, and spring force on a calibrated test stand. If you want a video of the measurement process, we send that too.
3. One factory for CNC + stamping + springs + heat sinks. Your flat spring often sits next to a machined bracket or a heat sink. If you send us the whole assembly, we coordinate the tolerances internally. No mismatched parts between suppliers. No shipping delays across three vendors. One purchase order, one quality standard, one responsible party.
Where these parts are used
Precision stamped flat springs are not exotic. They are everywhere, and they fail silently when made poorly.
Automotive: seat belt tensioners, brake pedal return springs, fuel injector clips, EGR valve springs.
Electronics: battery contacts, SIM card holders, grounding clips, switch contact springs in laptops and smartphones.
Industrial equipment: pressure switch diaphragms, valve return springs, locking washers for heavy machinery.
Medical devices: spring contacts in diagnostic probes, latch springs in surgical instruments, force elements in drug delivery pens.
Appliances: door interlock springs in washing machines, thermostat contact springs, lid hinges in blenders.
In each case, the spring must hold its force over hundreds of thousands of cycles. A 0.02 mm error in the bend radius can change the force by 15%. That is why we treat your drawing as a contract, not a suggestion.
Q: What is your MOQ?
A: No MOQ. We make 10 pieces for a prototype or 1 million for production. The unit price is higher for small batches because tooling and setup costs are spread over fewer parts. But you never have to over-order to meet a minimum.
Q: How do you guarantee tolerance and quality?
A: We run a first article inspection on every batch before production. We measure with a CMM (coordinate measuring machine) and optical comparators. The inspection report is included with your shipment. If a dimension is out of spec, we re-run the batch at no cost to you.
Q: What is your lead time for custom metal stamping?
A: Prototypes in 3-5 days after drawing review. Production parts in 7-15 days, depending on quantity and whether heat treatment is required. We ship worldwide via DHL, FedEx, or air freight. Most US and EU customers receive parts within 5-7 days of shipment.
Q: Can you provide material certificates?
A: Yes. Every batch includes a mill certificate for the raw material, plus our own hardness and thickness test reports. If your customer requires a specific standard (ASTM, JIS, EN), we source material to that standard and provide the cert.
Send your drawing
Stop comparing quotes from middlemen. Talk directly to the factory that will actually run your parts. Send us your 2D drawing or 3D model. We will review the material, tolerances, and tooling cost, and send you a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We speak engineer. We read drawings. We ship precision.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.