Precision Stamped Metal Grommets, Eyelets & Ferrules | Custom Made in China
OpeningYour drawing defines the part. Our press does the rest. We produce stamped metal grommets, eyelets, and ferrules exactly to your print, then verify every critical dimension before shipment. No
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our press does the rest. We produce stamped metal grommets, eyelets, and ferrules exactly to your print, then verify every critical dimension before shipment. No guesswork, no off-spec batches.
At a glance: Tolerances down to ±0.01 mm on critical diameters. Lead time 7–15 days for standard tooling. No MOQ—order 100 or 100,000 pieces. Full material traceability. Precision manufacturing from a 20-year-old factory in Dongguan, China.
In-house die design and fabrication; tool life 500k–2M hits
Batch size
No MOQ; prototype to mass production
Inspection
First article inspection (FAI), in-process SPC, final batch sampling per ISO 2859-1
Lead time
Tooling 7–10 days; production 5–7 days after approval
Certifications
ISO 9001:2015, material mill certificates, RoHS/REACH compliance
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every lot gets a unique batch number. We record material heat number, press settings, tooling wear, and inspection results for that batch. If a problem appears in your assembly line, we trace it back to the exact shift and machine within hours.
2. Inspection report per batch. You don't take our word for it. Each shipment includes a dimensional inspection report with actual measured values—not just a pass/fail stamp. Critical features are measured with CMM and optical comparators, and the data is yours.
3. One factory for CNC, stamping, springs, and heat sinks. Your grommet might need a mating spring or a CNC-machined housing. Instead of coordinating three suppliers across time zones, send us the whole assembly. We handle stamping, springs, CNC machining, and heat sink fabrication under one roof—one quality system, one shipping point, one accountable partner.
Where these parts are used
Stamped grommets, eyelets, and ferrules are quiet workhorses in demanding applications:
Automotive wiring harnesses: Eyelets terminate ground wires and shield braids. Ferrules protect cable entries through bulkheads.
Electrical enclosures: Grommets insulate and seal wires passing through sheet metal panels, preventing chafing and short circuits.
Medical devices: Small brass eyelets reinforce tubing connections and catheter hubs. Stainless ferrules provide a clean, sterilizable surface.
Consumer electronics: Aluminum eyelets add structural reinforcement to PCB mounting holes and speaker grilles.
Footwear and apparel: Brass eyelets withstand repeated lacing stress in boots, belts, and technical outerwear.
Industrial equipment: Steel ferrules reinforce hydraulic hose ends and pneumatic fittings where vibration is constant.
If your part guides a wire, reinforces a hole, or terminates a cable, we've likely stamped something similar.
Q: What is your MOQ?
A: No MOQ. We accept prototype orders of 100 pieces and scale to millions per month. Tooling cost is quoted separately and amortized over your order quantity.
Q: How do you guarantee tolerance and quality?
A: We run first article inspection on the first piece from each die. During production, we check critical dimensions every 2 hours per SPC plan. Final inspection uses AQL 0.65 for critical features. You receive the full inspection report with your shipment.
Q: What is your standard lead time?
A: Tooling takes 7–10 days for most grommets and eyelets. Production runs 5–7 days after you approve the first article. For urgent orders, we can prioritize your job—just ask.
Q: Do you provide material certificates?
A: Yes. Every batch ships with a mill certificate for the raw material, plus RoHS and REACH declarations when required. We keep records for 10 years.
Send your drawing
Stop chasing quotes from three different shops. Send us your drawing and get a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Include your material, tolerance, and estimated quantity. We'll reply with pricing, tooling cost, and a delivery date. Custom metal stamping, made in China, with no MOQ and no surprises.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.