Precision Stamped Sheet Metal Enclosures Covers | Custom Metal Stamping No MOQ
OpeningYour drawing is the starting point. We turn it into a stamped sheet metal enclosure or cover that fits, protects, and lasts.We are BQUQ, a precision manufacturing factory in Dongguan, China. 20
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing is the starting point. We turn it into a stamped sheet metal enclosure or cover that fits, protects, and lasts.
We are BQUQ, a precision manufacturing factory in Dongguan, China. 20 years in metal stamping. We verify every part against your print before shipment. No surprises.
Tolerance: ±0.05 mm (up to ±0.02 mm on critical features)
Lead time: 7–15 days for prototypes, 15–25 days for production
All tooling is designed and built in-house. We use progressive dies for high-volume runs and single-hit dies for prototypes and low volumes. Servo presses give us repeatable stroke control, which means consistent bend angles and hole positions across every batch.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every coil of material has a heat number. Every batch gets a traveler card. If a part fails in your line, we trace it back to the exact material lot and press run. You get full traceability, not just a box of parts.
2. Inspection report per batch.
We ship a dimensional report with every order. It includes CMM data for critical features, surface finish readings, and material thickness verification. You do not need to re-measure everything. You can trust the numbers we send.
3. One factory for CNC + stamping + springs + heat sinks.
Your enclosure often needs a heat sink, a spring clip, or a CNC-machined bracket. Most suppliers outsource these. We do them in-house. That means one purchase order, one quality system, one shipping date. Fewer emails, fewer delays, less risk.
Where these parts are used
Stamped enclosures and covers are not decorative. They protect electronics, guide airflow, and shield interference.
Power supplies: steel covers for AC/DC converters, EMI shielding panels
EV battery packs: aluminum covers for battery management systems, cooling plate housings
Industrial controls: enclosures for PLCs, VFDs, and motor starters
Telecom equipment: rack-mount covers, RF shield boxes, base station housings
Medical devices: stainless steel enclosures for diagnostic instruments, imaging equipment
LED lighting: heat sink covers, driver enclosures, reflector housings
If your part needs a bend, a hole, a thread, or a painted surface, we can stamp it. If it needs to be flat, square, and dimensionally stable, we do that too.
Q1: Do you really have no MOQ?
Yes. We run prototypes from 1 piece. Production orders can start at 100 pieces. Our tooling is modular, so we do not force you into large batches. You pay for parts, not for minimums.
Q2: How do you control tolerance and quality?
We use progressive dies with in-die sensors for high-volume runs. For precision features, we use CMM and optical comparators. Every batch gets a first-article inspection (FAI) and a final dimensional report. We hold ±0.05 mm on standard stamped features, and ±0.02 mm on critical holes and bends.
Q3: What is your typical lead time?
Prototypes: 7–10 days after drawing approval. Production: 15–25 days, depending on surface finish and quantity. We can expedite to 5 days for urgent samples. We ship via DHL, FedEx, or sea freight – your choice.
Q4: Can you provide material certificates?
Yes. We supply mill certificates (MTC) for all materials, including chemical composition and mechanical properties. We also provide RoHS and REACH compliance documents. If you need a specific grade or coating, we source it and certify it.
Send your drawing
Stop guessing. Send us your 2D or 3D file (STEP, IGES, PDF, or DWG). We will review the geometry, check the tolerances, and confirm the material.
You get a firm quote in 12 hours. Not a range. Not a maybe. A fixed price with lead time.
Custom metal stamping, made in China, with no MOQ. That is what we do.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.