Precision Zinc Plated Stamped Brackets & Clips | Custom Metal Stamping No MOQ
OpeningYour drawing defines the part. We define the process.These zinc plated stamped brackets and clips are produced exactly to your CAD file. We do not sell off-the-shelf blanks. Every piece is stam
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We define the process.
These zinc plated stamped brackets and clips are produced exactly to your CAD file. We do not sell off-the-shelf blanks. Every piece is stamped, plated, and verified before shipment.
Tolerance: ±0.05 mm on critical dimensions
Lead time: 10–15 days for standard stamping
No MOQ: order 50 pieces or 500,000
Material thickness: 0.3 mm to 6.0 mm
Surface: zinc plating (clear, yellow, or blue) per ASTM B633
We are a precision manufacturing factory in Dongguan, China, with 20 years of metal stamping experience. You send the drawing. We return a firm quote in 12 hours.
100% dimensional check on critical features; batch sampling per AQL 2.5
Lead time
Prototypes: 5–7 days; production: 10–15 days after approval
Certifications
ISO 9001:2015, material certificates (EN 10204 3.1) available
All stamping dies are made in-house. We use progressive dies for high-volume clips and compound dies for complex bracket geometries. This keeps unit cost low and repeatability high.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality
Each batch gets a unique job number. We record material lot, die set, press settings, and plating bath data. If a part fails in your assembly, we trace it back to the exact production shift. You get full traceability without asking.
2. Inspection report per batch
Every shipment includes a dimensional inspection report. We measure critical features with CMM and optical comparators. The report lists actual values against your drawing tolerances. No surprises at incoming QC.
3. One factory for CNC + stamping + springs + heat sinks
Your bracket might need a spring clip, a CNC-machined pin, or a heat sink attached. We do all four processes under one roof. You avoid multiple suppliers, shipping delays, and tolerance mismatches between parts. One drawing set, one responsible party.
Where These Parts Are Used
Zinc plated stamped brackets and clips are workhorse components. We supply them for:
Automotive: seat belt brackets, fuel line clips, brake cable retainers
Zinc plating gives corrosion resistance up to 72 hours in salt spray (clear) or 120 hours (yellow). For outdoor or high-humidity use, we recommend yellow or blue zinc plus a sealant.
Q: What is your MOQ?
A: No MOQ. We stamp 50 pieces for a prototype run or 500,000 for production. Tooling cost is quoted separately for low volumes, then amortized into unit price for high volumes.
Q: How do you guarantee tolerance and quality?
A: We run first-article inspection on every new die. During production, we check critical dimensions every 2 hours. A full dimensional report accompanies each shipment. If a part is out of tolerance, we replace it at no cost.
Q: What is your lead time?
A: Prototype stamping: 5–7 days. Production: 10–15 days after you approve the sample. For urgent orders, we can expedite to 7 days on simple parts.
Q: Do you provide material certificates?
A: Yes. We supply EN 10204 3.1 material certificates for steel, stainless, and aluminum. Plating thickness reports are available per ASTM B633.
Send Your Drawing
Send us your 2D or 3D file. We will check formability, recommend material and plating, and return a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Custom metal stamping made in China does not mean compromising on precision. It means getting the same tolerance at a lower cost. Send your drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.