OpeningYour drawing defines the part. We define the process.These zinc plated stamped brackets and clips are produced exactly to your CAD file. We do not sell off-the-shelf blanks. Every piece is stam
Your drawing defines the part. We define the process.
These zinc plated stamped brackets and clips are produced exactly to your CAD file. We do not sell off-the-shelf blanks. Every piece is stamped, plated, and verified before shipment.
We are a precision manufacturing factory in Dongguan, China, with 20 years of metal stamping experience. You send the drawing. We return a firm quote in 12 hours.
| Parameter | Value |
|---|---|
| Materials | SPCC, SECC, SUS301, SUS304, 5052 aluminum, brass, phosphor bronze |
| Material thickness | 0.3 mm – 6.0 mm |
| Stamping machines | 25-ton to 250-ton high-speed and hydraulic presses |
| Secondary processes | Tapping, countersinking, bending, deburring, riveting |
| Tolerances | ±0.05 mm standard; ±0.02 mm on request |
| Surface finish | Zinc plating (clear/yellow/blue), nickel, chrome, powder coat, passivation |
| Batch size | No MOQ – prototypes to mass production |
| Inspection | 100% dimensional check on critical features; batch sampling per AQL 2.5 |
| Lead time | Prototypes: 5–7 days; production: 10–15 days after approval |
| Certifications | ISO 9001:2015, material certificates (EN 10204 3.1) available |
All stamping dies are made in-house. We use progressive dies for high-volume clips and compound dies for complex bracket geometries. This keeps unit cost low and repeatability high.
1. Batch-traceable quality Each batch gets a unique job number. We record material lot, die set, press settings, and plating bath data. If a part fails in your assembly, we trace it back to the exact production shift. You get full traceability without asking.
2. Inspection report per batch Every shipment includes a dimensional inspection report. We measure critical features with CMM and optical comparators. The report lists actual values against your drawing tolerances. No surprises at incoming QC.
3. One factory for CNC + stamping + springs + heat sinks Your bracket might need a spring clip, a CNC-machined pin, or a heat sink attached. We do all four processes under one roof. You avoid multiple suppliers, shipping delays, and tolerance mismatches between parts. One drawing set, one responsible party.
Zinc plated stamped brackets and clips are workhorse components. We supply them for:
Zinc plating gives corrosion resistance up to 72 hours in salt spray (clear) or 120 hours (yellow). For outdoor or high-humidity use, we recommend yellow or blue zinc plus a sealant.
Looking for a different part? We also machine Precision Stamped Brass Electrical Terminals Contacts Made to Drawing in the same Dongguan factory.
Q: What is your MOQ? A: No MOQ. We stamp 50 pieces for a prototype run or 500,000 for production. Tooling cost is quoted separately for low volumes, then amortized into unit price for high volumes.
Q: How do you guarantee tolerance and quality? A: We run first-article inspection on every new die. During production, we check critical dimensions every 2 hours. A full dimensional report accompanies each shipment. If a part is out of tolerance, we replace it at no cost.
Q: What is your lead time? A: Prototype stamping: 5–7 days. Production: 10–15 days after you approve the sample. For urgent orders, we can expedite to 7 days on simple parts.
Q: Do you provide material certificates? A: Yes. We supply EN 10204 3.1 material certificates for steel, stainless, and aluminum. Plating thickness reports are available per ASTM B633.
Send us your 2D or 3D file. We will check formability, recommend material and plating, and return a firm quote in 12 hours.
Email: sc@bquq.com WhatsApp: +86 13713157787
Custom metal stamping made in China does not mean compromising on precision. It means getting the same tolerance at a lower cost. Send your drawing today.
| Parameter | Capability |
|---|---|
| Materials | SPCC, SGCC, SUS301/304/316, brass, copper, beryllium copper, phosphor bronze |
| Process | Progressive die stamping, fine blanking, deep drawing, bending, tapping |
| Tolerance | ±0.01mm standard, ±0.005mm on request |
| Surface | Zinc plating, nickel, tin, gold, powder coating, passivation, anodizing |
| Die Size | Up to 1200 x 800 mm, 16-250 ton presses |
| Thickness | 0.05 - 6.0 mm sheet metal, wire 0.1 - 8.0 mm |
| Prototype | 7-15 days tooling, no MOQ on samples |
| Inspection | Full report per batch, CMM and optical measurement |
