Custom CNC Collet Chuck Auto Lathe 60 Type Round Bore
OpeningYour drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact dimensions, verified with a full inspection report before shipment. No surprises at your incomi
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact dimensions, verified with a full inspection report before shipment. No surprises at your incoming QC.
Tolerance: ±0.005 mm on bore and taper
Lead time: 15–20 working days for prototypes
No MOQ: order one piece or one thousand
Material: 20CrMnTi or 65Mn, case-hardened to HRC 58–62
Made in China, shipped worldwide with full traceability
Specifications
Parameter
Value
Type
Auto lathe 60 type round bore collet chuck
Bore diameter range
Ø3 mm – Ø60 mm (custom per drawing)
Outer diameter
Ø60 mm (standard), custom up to Ø80 mm
Taper angle
30° or 45° (per your spec)
Material options
20CrMnTi, 65Mn, 9SiCr, or equivalent
Hardness
Case-hardened HRC 58–62, core HRC 35–45
Surface finish
Ra 0.4 µm on bore and taper
Tolerance
±0.005 mm on critical diameters
Concentricity
≤0.008 mm TIR
Machining process
CNC turning, internal grinding, wire EDM for slots
Heat treatment
Carburizing or induction hardening, then tempering
We run the 60 type collet on our own CNC lathes and grinders. The bore is ground after heat treatment to hold the ±0.005 mm tolerance. Slots are cut by wire EDM for clean edges and consistent spring action. Each chuck is tested with a master gauge before it leaves the floor.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every batch gets a unique heat number and lot code. You can trace the material certificate, heat treatment record, and inspection data back to the exact shift that made your parts. No mixing, no guesswork.
2. Inspection report per batch.
You receive a dimensional report for every batch, not just a sample. We measure bore diameter, taper angle, concentricity, and hardness on each piece or per AQL sampling plan. The report is signed by our QC engineer and sent with the shipment.
3. One factory for CNC + stamping + spring + heatsink.
Your collet chuck is one component. Maybe you also need a spring, a stamped retainer, or a heatsink for the spindle motor. We make all of them under one roof. One purchase order, one quality system, one shipping date. You save time and freight cost.
Where these parts are used
The 60 type round bore collet chuck is a workhorse in automatic lathes and Swiss-type machines. Typical applications:
High-volume turning of small shafts – pins, rollers, and valve stems, where quick clamping cycles matter
Bar feeding operations – holding round bar stock from Ø3 mm to Ø60 mm for continuous machining
Secondary operations – drilling, reaming, or thread cutting on parts already turned, where concentricity must stay under 0.01 mm
Medical device parts – bone screws and surgical pins, where surface finish and repeatability are critical
Electrical connectors – brass or copper contacts machined at high spindle speeds, requiring a chuck that grips without marking the surface
The round bore design gives you full contact around the workpiece. That means less deformation on thin-walled parts and better grip on hardened materials. It is the right choice when you need a reliable, repeatable clamping solution for your auto lathe.
Questions buyers ask before ordering
Q: Is there a minimum order quantity?
A: No MOQ. We accept one-piece prototype orders and scale up to full production. The unit price drops with quantity, but you never pay a penalty for starting small.
Q: What tolerance can you hold on the bore and taper?
A: We hold ±0.005 mm on the bore diameter and ±0.01 mm on the taper angle. Concentricity between the bore and the outer taper is kept under 0.008 mm TIR. We verify every chuck with a master gauge before shipment.
Q: What is your typical lead time?
A: Prototypes ship in 15 working days. Production runs of 100–1000 pcs take 25 working days. For urgent orders, we can expedite to 10 days at a 10% surcharge. We confirm the exact date when you send your drawing.
Q: Do you provide material certificates and heat treatment reports?
A: Yes. Every batch includes a material certificate (EN 10204 3.1), a heat treatment report with hardness values, and a dimensional inspection report. These documents are included free of charge with every shipment.
Send your drawing
We quote within 12 hours. Send us your 2D or 3D file, your material spec, and your quantity. We will respond with a firm price, a confirmed lead time, and a technical review of your part.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is our daily work. Your custom CNC collet chuck is no exception. Send the drawing and see the difference.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.