Custom CNC Collet Chuck 630 Type Auto Lathe Round Bore | BQUQ
OpeningYour drawing defines the part. We machine it. That is the whole process.This is a 630 type round bore spring collet chuck for auto lathes. We make it to your exact dimensions. Not from stock. N
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. That is the whole process.
This is a 630 type round bore spring collet chuck for auto lathes. We make it to your exact dimensions. Not from stock. Not from a catalog. From your print.
Before shipment, every chuck is verified on a CMM. You get the report. No surprises.
Tolerance: ±0.005 mm on bore and taper
Lead time: 10-15 working days for prototypes
No MOQ — order one piece or one thousand
Material: 65Mn, 60Si2Mn, or your specified alloy
Hardness: 45-52 HRC after heat treatment
We are a precision manufacturing factory in Dongguan, China. 20 years in CNC machining, stamping, springs, and heat sinks. The collet chuck is not a side project. It is core work.
Specifications
Parameter
Value
Type
630 type round bore spring collet chuck
Application
Auto lathe, CNC lathe, Swiss-type machines
Bore diameter
3 mm – 60 mm (custom per drawing)
Outer diameter
Up to 200 mm
Material options
65Mn, 60Si2Mn, 9SiCr, 40Cr, or customer-specified
Hardness
45-52 HRC (spring temper)
Tolerance
±0.005 mm on bore, ±0.01 mm on outer diameter
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on taper
Slit width
0.3 mm – 1.5 mm, EDM wire cut
Heat treatment
Oil quenched, tempering to spec
Inspection
100% CMM check before shipment
Batch size
1 – 10,000 pieces
Lead time
10-15 days prototype, 20-30 days production
Certification
Material certs, heat treatment report, inspection report
We use CNC grinding for the bore and taper. Slits are cut by wire EDM. This gives clean edges and consistent spring action. No burrs. No drift.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every batch gets a unique lot number. We track material, heat treatment, and grinding parameters for that lot. If you have a problem, we trace it back to the exact operation. You get full documentation. This is not a luxury. It is standard for us.
2. Inspection report per batch.
You do not have to ask for it. It is included. The report covers bore diameter, taper angle, hardness, and surface finish. We use a CMM and a Rockwell hardness tester. The numbers are real. We sign them.
3. One factory for CNC + stamping + springs + heat sinks.
Your collet chuck is often part of a larger assembly. We make the chuck. We also make the spring inside it, the stamped housing, and the heat sink if you need one. One vendor. One quality system. One shipping point. Less coordination, fewer delays.
Where these parts are used
The 630 type round bore collet chuck is for workholding on automatic lathes. It grips round bar stock during turning, threading, and parting operations.
CNC Swiss lathes for medical device components — pins, bone screws, dental implants
Auto lathes for electronic connector pins and terminals
Watch and clock parts — small shafts, gears, pinions
Fastener production — screws, bolts, rivets
Automotive fuel injector components
Precision instrument shafts for motors and encoders
These chucks run at high spindle speeds. They need consistent clamping force and repeatable concentricity. Our slit geometry and heat treatment give you that. Run them at 8,000 RPM. They hold.
Questions buyers ask before ordering
Q: What is your MOQ?
A: No MOQ. We make one prototype for you to test. Then you decide on production quantity. Many buyers start with 5-10 pieces to validate fit and performance.
Q: How do you control tolerance and quality?
A: We grind the bore and taper to ±0.005 mm. After heat treatment, we re-grind to correct any distortion. Every piece is checked on a CMM. You get the inspection report with the shipment.
Q: What is your lead time?
A: Prototype: 10-15 working days after drawing approval. Production: 20-30 working days. If you need faster, tell us. We can split the batch or run overtime.
Q: Can you provide material certificates?
A: Yes. We provide mill certificates for the raw material, heat treatment records, and our own inspection report. All traceable to your batch number.
Send your drawing
Send us your print. We will quote you within 12 hours.
We will confirm material, tolerance, and lead time. If your drawing has issues, we will tell you before we quote. That is how we work.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Custom CNC collet chuck, made in China, precision manufacturing, no MOQ. That is what we do. Send the drawing.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.