Custom CNC Machined 2J Collet Chuck | Precision Manufacturing Made in China
OpeningYour 2J collet chuck starts as raw bar stock and ends as a verified, drop-in toolholder. We machine it to your drawing, not a catalog standard. Every critical dimension is checked on a CMM befo
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your 2J collet chuck starts as raw bar stock and ends as a verified, drop-in toolholder. We machine it to your drawing, not a catalog standard. Every critical dimension is checked on a CMM before the part leaves our floor.
At a glance: Tolerance ±0.005 mm on bore and taper, surface finish Ra 0.4, lead time 7-12 days, no MOQ.
We have run 2J collet chucks for Swiss lathes, CNC turning centers, and live tooling turrets for over 20 years. If you need a custom thread pitch, a modified taper angle, or a special pull-back design, we build it.
Specifications
Parameter
Value
Material options
8620 steel (case-hardened), 4140 pre-hardened, 12L14 for high-speed, 303/304 stainless
Hardness
58-62 HRC (case depth 0.8-1.2 mm) or 28-32 HRC core
Taper accuracy
2J taper ground to ±0.005 mm, concentricity ≤0.008 mm TIR
7 days for prototypes, 12 days for production runs
Country of origin
Made in China, Dongguan factory
We grind the 2J taper in-house. We do not outsource the critical geometry. This keeps the runout consistent from the first piece to the last.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each heat of steel gets a unique lot number. We record the material cert, machining parameters, and inspection results for that lot. If you have a problem six months later, we can trace it back to the exact shift and operator.
2. Inspection report per batch. You get a dimensional report with every shipment. It lists all critical features: taper angle, bore diameter, concentricity, and hardness. No generic "certificate of conformance." You see the actual measured values.
3. One factory for CNC + stamping + springs + heat sinks. Your collet chuck is not an isolated part. If your assembly also needs a spring collet, a stamped retainer, or a heat sink for the spindle drive, we make all of it under one roof. Fewer suppliers, fewer logistics headaches, one accountable partner.
Where these parts are used
Custom CNC collet chucks are not shelf items. Our customers use them in:
Swiss-type lathes for medical bone screws and dental implants, where runout below 0.005 mm is mandatory.
Multi-spindle automatics for high-volume brass fittings, requiring a hardened chuck that survives millions of cycles.
Live tooling turrets on CNC turning centers, where the 2J collet holds a driven tool shank.
Secondary operations on manual lathes for prototype shops that need a custom thread or a longer nose length than standard.
Automotive fuel injector bodies, where the chuck must grip thin-walled tubing without distortion.
In every case, the chuck is machined to match the specific spindle nose and the specific workpiece. That is why we never stock "universal" chucks.
Questions buyers ask before ordering
Q: What is your MOQ?
A: No MOQ. We make one piece for a prototype or 5,000 pieces for production. The per-piece price drops with quantity, but we do not force you to buy more than you need.
Q: How do you guarantee tolerance and quality?
A: We grind the taper and bore on dedicated cylindrical grinders. Each chuck is inspected on a CMM and an air gauge for taper contact. We send you the inspection report with the shipment. If a part is out of spec, we replace it at no cost.
Q: What is your lead time for a custom 2J collet chuck?
A: 7 days for a prototype or a single piece. 10-12 days for production batches. If you need it faster, tell us—we can split the batch and ship partial quantities.
Q: Can you provide material certificates and heat treatment reports?
A: Yes. Every batch comes with a mill certificate for the raw material and a heat treatment report showing hardness and case depth. We also provide a RoHS or REACH declaration if required.
Send your drawing
Send us your 2J collet chuck drawing. We will review the geometry, suggest a material if you are unsure, and send you a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
No MOQ, no minimum order quantity, no waiting. Just a precise, verified part made in China.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.