-
English
- sc@bquq.com
Stamped battery tabs for Li-ion explained by a China source factory: nickel, aluminum and copper tabs, plating, welding and design rules. Quote in 12 hours.
The compression spring rate formula k = Gd⁴/(8D³n), explained variable by variable with a worked example, measuring tips, and how to spec rate to a factory.
Stamping die troubleshooting from a China source factory: burrs, cracking, galling, off-location holes and springback, with causes and real fixes. Quote in 12 hours.
Stamped EMI gaskets and fingers by BQUQ: materials, contact force, shielding and compression. Progressive-die stamping to ±0.05 mm at our Dongguan factory.
What defines a compression spring: the parameters a factory needs to quote, typical materials and tolerances, and ordering custom springs from China.
Retention force in stamped clips explained by a China source factory: normal force, beam design, vibration, fatigue and materials. Get a quote in 12 hours.
How to select coil stock for stamping: gauge, temper, flatness, camber and edge condition. A China source factory explains the specs that decide part consistency. Quote in 12h.
R = ΔT/Q with a worked example, plus typical convection values (natural 5–10, forced air 25–100 W/m²·K) and the thermal spec your factory needs.
6063-T5 conducts roughly 200 W/m·K vs 155–170 for 6061-T6. When the alloy matters for heat sinks and when strength wins. Typical values explained.
Aluminum vs steel for stamping compared by a China source factory: formability, bend radii, springback, cost per part, corrosion and finishing. Quote in 12 hours.
Stamped copper busbars explained by a China source factory: alloy choice, current capacity, thickness, surface finish and tooling. Send drawings, get a quote in 12 hours.
How to hold tight tolerances in high-precision stamping of thin strip metal — strip handling, die design, tooling and inspection, from BQUQ, with 12-hour quoting.
Extruded, CNC-machined, stamped, and skived heat sinks compared: tooling cost, fin density, and which wins at your volume, from a Dongguan source factory.
Terminal plating thickness by BQUQ: tin, nickel, gold and silver ranges from 0.5 µm, selective plating, why microns set contact life. Quote in 12 hours.
Stamped metal enclosures by BQUQ: progressive-die shielding cans, lids and frames to ±0.05 mm, plus EMI plating. Send drawings for a 12-hour quote.
