-
English
- sc@bquq.com
How stamping unit cost falls with volume: tooling, setup and run-rate economics at 10k, 100k and 1M parts. BQUQ, a Dongguan source factory. Quote in 12 hours.
Stamping 0.1 mm and thinner strip: material, die clearance, feeding and burr control. BQUQ, a Dongguan source factory, runs precision thin-gauge stamping. 12-hour quotes.
Stamped cable clamps, shields and grounding contacts: design, materials and termination. BQUQ, a Dongguan ISO9001 source factory. Quote within 12 hours.
Stamping tooling lead time explained by a China source factory: design, machining, tryout and first article. BQUQ builds progressive dies. Quote in 12 hours.
Plating, anodizing, passivation and tumbling for stamped parts: cost, thickness and corrosion performance. BQUQ, a Dongguan source factory. Quote in 12 hours.
What metals and plastics CNC actually machines: cost, machinability and strength compared — from an ISO9001 Dongguan source factory. Quote in 12 hours.
Stamped connector shells from a Dongguan source factory: mating tolerances, shielding design, plating and tooling. BQUQ holds ±0.05 mm. Quote in 12 hours.
In-die tapping, forming and riveting move secondary stamping operations into the press. BQUQ explains cycle time, cost and when to keep them offline. Quote in 12 hours.
Phosphor bronze C5210, beryllium copper C17200, and 301 stainless for stamped spring contacts: conductivity, strength, fatigue, cost, and selection.
How stamping quotes work: tooling $3,000–$50,000 (indicative) plus per-part price, what drives both, and when stamping beats CNC machining on cost.
Progressive die stamping from a Dongguan source factory: terminals, contacts, brackets, enclosures, materials and plating, and die development.
Music wire, stainless 302/304, and beryllium copper C17200 for springs: strength, corrosion, conductivity, temperature, cost, and how to choose.
Compare stamping vs fine blanking on tooling cost, burr height, edge finish and volume break-even — from BQUQ, ISO9001, 12-hour quoting.
Zipper and folded fin stamped heat sinks explained: fin geometry, tooling, materials, and DFM rules from BQUQ, an ISO9001 Dongguan factory quoting in 12 hours.
"Metal stamping vs die casting for enclosures: compare tooling cost, wall thickness, EMI shielding and unit price. BQUQ quotes in 12 working hours."
