Custom CNC Collet Chuck 25 Type Round Bore Extended | Precision Made in China
OpeningSend us your drawing. We machine the collet chuck to your exact dimensions. Every unit is verified before shipment. No surprises.This is a 25 Type round bore extended collet chuck for auto lath
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Send us your drawing. We machine the collet chuck to your exact dimensions. Every unit is verified before shipment. No surprises.
This is a 25 Type round bore extended collet chuck for auto lathes. It is built for high-speed, high-repeatability workholding. We hold concentricity to 0.005 mm TIR. Surface finish down to Ra 0.4.
Tolerance: ±0.005 mm on bore and taper
Lead time: 15–20 days for custom batches
No MOQ: order 1 piece or 1,000 pieces
Material: 20CrMnTi or 8620 steel, case-hardened to HRC 58–62
Made in China, exported worldwide
Specifications
Parameter
Value
Type
25 Type round bore extended collet chuck
Bore diameter range
Ø3 mm – Ø25 mm (custom per drawing)
Collet taper angle
30° (standard), custom available
Concentricity (TIR)
≤0.005 mm
Surface finish
Ra 0.4 – 0.8 µm on bore and taper
Hardness
Case-hardened HRC 58–62, depth 0.8–1.2 mm
Material options
20CrMnTi, 8620, 4140, or per your spec
Machining process
CNC turning, internal grinding, OD grinding
Inspection
100% dimensional check, CMM report per batch
Batch size
1 – 10,000 pcs
Lead time
15 days for prototypes, 20 days for production
Coating
Plain, black oxide, or TiN per request
We use CNC lathes and cylindrical grinders. Internal bore and taper are ground in one setup. This ensures geometric consistency across the batch.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique number. We record material heat number, machine used, operator, and inspection results. If you have a problem on your line, we trace it to the exact shift. No guesswork.
2. Inspection report per batch.
You get a dimensional report with every shipment. It lists bore diameter, taper angle, TIR, hardness, and surface finish. The report matches your drawing, point by point. Your IQC can verify in minutes.
3. One factory for CNC + stamping + springs + heat sinks.
Your collet chuck is not an isolated part. You may need a spring collet, a stamped retainer, or a heat sink for the spindle drive. We make all of them under one roof. Fewer suppliers, fewer logistics headaches, one quality standard.
Where these parts are used
This collet chuck is for automatic lathes, especially Swiss-type and sliding-headstock machines. Common applications:
Precision shafts for electric motors, Ø6–20 mm, held with 0.005 mm TIR.
Medical device components like bone screws and drill bits, where surface finish and concentricity are critical.
Automotive fuel injector parts – high-volume, tight tolerance, extended bore for long workpieces.
Connectors and pins for electronics, where the round bore keeps the part centered under high spindle speeds.
Fastener blanks – hex and round head bolts, machined from bar stock with extended reach.
The extended bore design supports longer workpieces without vibration. That is why it is chosen for parts with length-to-diameter ratios above 3:1.
Q: What is your MOQ?
A: No MOQ. We accept one piece for prototype validation. Production orders of 100–5,000 pcs are typical. You pay the same per-unit attention either way.
Q: How do you guarantee tolerance and quality?
A: We grind the bore and taper in one setup. Each piece is measured on a CMM and a profilometer. We send you the inspection report before shipment. If a dimension is out of spec, we reject it, not ship it.
Q: What is your lead time for custom CNC collet chucks?
A: Prototypes: 15 days after drawing approval. Production: 20 days. For urgent orders, we can split the batch and ship the first 20% in 10 days. We quote the exact date with your price.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw steel, heat treatment reports, and hardness test results. All documents are in English and traceable to the batch number.
Send your drawing
Get a firm quote in 12 hours. We review your drawing, confirm material and tolerance, and reply with price and lead time. No obligation.
Email your PDF or STEP file to sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China, with 20 years in CNC machining, stamping, springs, and heat sinks. Your custom CNC collet chuck is made to print, verified before shipment, and ready for your line.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.