Custom CNC Collet Chuck Auto Lathe 28 Type Round Bore | BQUQ
OpeningSend us your drawing for a custom CNC collet chuck. We machine it to your exact specs, verify round bore concentricity before shipment, and back it with a batch-traceable inspection report.Tole
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Send us your drawing for a custom CNC collet chuck. We machine it to your exact specs, verify round bore concentricity before shipment, and back it with a batch-traceable inspection report.
Tolerance: ±0.005 mm on bore and taper
Lead time: 15–20 working days for standard sizes
No MOQ — order one piece or one thousand
Material: 20CrMnTi or 65Mn, case-hardened to HRC 58–62
Made in China, precision manufacturing since 2005
Specifications
Parameter
Value
Type
Auto lathe 28 type round bore collet chuck
Bore diameter range
Ø3 mm – Ø28 mm (custom per drawing)
Taper angle
30° (standard), custom on request
Concentricity (TIR)
≤0.005 mm at nose
Surface roughness
Ra 0.4 µm on bore, Ra 0.8 µm on taper
Material
20CrMnTi (case-hardened), 65Mn (spring steel)
Hardness
HRC 58–62, case depth 0.8–1.2 mm
Machining process
CNC turning, internal grinding, wire EDM for slots
Slots
3-slot or 4-slot, width 1.5–3.0 mm per drawing
Finish
Black oxide or plain, no coating unless specified
Batch size
1–5000 pcs, no MOQ
Inspection
100% dimensional check, CMM report per batch
We run these on Citizen and Star sliding-head lathes for the chuck body, then finish grind the bore and taper on a Junker internal grinder. Slots are cut with wire EDM to avoid burrs. Every chuck is tested with a master collet before packing.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique heat number and serial range. We record material certs, grinding wheel specs, and final gauging results. If you have a problem six months later, we trace it to the exact shift and machine.
2. Inspection report per batch.
You get a CMM report with bore diameter, taper angle, concentricity, and slot width for every piece. No sampling guesswork. We also include a video of the final run-out check on request.
3. One factory for CNC + stamping + spring + heatsink.
Your collet chuck is not an island. If your assembly needs a spring-loaded pusher, a stamped retainer, or a heatsink for a motor driver, we make all of it under one roof. Fewer vendors, shorter lead times, one accountable partner.
Where these parts are used
A 28 type round bore collet chuck is the workholding core for small-diameter bar work on automatic lathes. Typical applications:
Watch pinions and balance staffs — bores from Ø3 mm to Ø8 mm, need sub-micron concentricity
Medical screw implants — titanium and stainless, batch sizes of 500–5000, require full traceability
Connector pins for automotive sensors — brass and free-cutting steel, high feed rates, slot wear is the failure point
Hydraulic valve spools — Ø10 mm to Ø20 mm, need taper accuracy to hold hydraulic clearance
Fastener blanks — Ø6 mm to Ø28 mm, high volume, our 65Mn version gives 2x longer life than standard 20CrMnTi
If you machine bar stock on a Swiss or automatic lathe, this chuck is the part that decides your scrap rate. We make it to hold tight.
Q: What is your MOQ?
A: No MOQ. We make one piece for prototype validation, then scale to your production quantity. Tooling cost is amortized into the unit price, so a single piece is slightly higher per unit but still firm-quoted.
Q: What tolerance can you hold on the bore and taper?
A: Standard is ±0.005 mm on bore diameter and ±0.002 mm on taper angle. For high-speed auto lathe use, we recommend specifying TIR ≤0.005 mm at the nose. We verify with a CMM and a master collet before shipment.
Q: What is your lead time for a custom CNC collet chuck?
A: 15–20 working days for standard materials and sizes. If you need 65Mn with special slot geometry, add 3–5 days for wire EDM. We ship DHL or FedEx, door-to-door.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material (20CrMnTi or 65Mn), heat treatment report, and hardness test results. No extra charge.
Send your drawing
Email your PDF or STEP file to sc@bquq.com. We reply with a firm quote in 12 hours — price, lead time, and tolerance confirmation.
Prefer chat? WhatsApp +86 13713157787 with a photo of your drawing. We answer within the hour during China business time (GMT+8).
Your custom CNC collet chuck, made in China, verified before shipment. No MOQ, no surprises.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.