Custom CNC Collet Chuck 38 Type Round Bore Auto Lathe Precision
OpeningWe machine your 38 Type round bore spring collet chuck to your drawing. Not from stock. Not a modified standard. Made from your print, verified before shipment.Every chuck is measured on a CMM.
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine your 38 Type round bore spring collet chuck to your drawing. Not from stock. Not a modified standard. Made from your print, verified before shipment.
Every chuck is measured on a CMM. We check bore concentricity, slot width, and spring temper. If it doesn't match your tolerance, it doesn't ship.
At a glance: Concentricity within 0.005 mm. Lead time 10-15 working days. No MOQ. One chuck or one thousand — same inspection standard.
Batch-traceable quality. Each lot gets a heat number and a job number. If you need to trace a bad batch, we can tell you the exact machine, operator, and heat treatment cycle. That is not common for a job shop in China.
Inspection report per batch. You get a dimensional report with every shipment. Bore diameter, slot width, hardness, concentricity — measured and recorded. No "trust us" quality. You see the numbers.
One factory for CNC + stamping + springs + heat sinks. Your collet chuck is not the only part in your assembly. We make the spring inside it, the stamped retainer plate, and the heat sink next to it. One purchase order, one quality system, one shipping date. Fewer suppliers, fewer delays.
Where these parts are used
A 38 Type round bore collet chuck is a workhorse in automatic lathes. You see them in:
Swiss-type CNC lathes for bar stock feeding — the chuck grips round stock from 1 mm to 38 mm diameter.
Multi-spindle automatics in automotive fastener lines. They hold valve blanks, pinion shafts, and bearing races.
Medical implant machining where surface finish and concentricity are not optional. A collet that runs out 0.01 mm ruins a titanium screw.
Hydraulic fitting production — high-volume brass and steel fittings where cycle time matters and tool change is not acceptable.
In every case, the collet is the last thing between the spindle and the part. If it flexes, the part is scrap.
What is your MOQ?
Zero. We make one prototype for you to test. If it works, we quote production. If it does not, you paid for one piece only.
What tolerance can you hold on the bore?
We hold 0.005 mm TIR on bore concentricity for 38 Type chucks. Slot width is ± 0.02 mm. If your drawing calls for tighter, send it. We will tell you if it is feasible before we quote.
What is your lead time?
10-15 working days for standard materials like 65Mn. If you need 5-day rush, tell us when you send the drawing. We will confirm if we can fit it.
Do you provide material certificates?
Yes. Mill test certificate for the raw steel, heat treatment report, and hardness test results. All included with the shipment at no extra cost.
Send your drawing
Send us your PDF or STEP file. We reply with a firm quote in 12 hours. That quote includes unit price, lead time, and tooling cost (if any).
No MOQ. No hidden charges. Precision manufacturing, made in China, with the inspection report to prove it.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Your drawing. Our machine. Verified before it ships.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.