Custom CNC Auto Lathe Collet Set 50-55-60 Heavy Series | Made in China
OpeningWe machine your collet set to your drawing, not to a stock photo. Every bore, every taper, every slot is cut from your CAD file and verified with a CMM before the box is sealed.If you need a he
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine your collet set to your drawing, not to a stock photo. Every bore, every taper, every slot is cut from your CAD file and verified with a CMM before the box is sealed.
If you need a heavy-series auto lathe collet set in 50, 52, 55, or 60 mm, you are looking at the right shop. We have run these parts for 20 years on our own CNC lathes and machining centers in Dongguan.
Tolerance: ±0.005 mm on bore and taper
Lead time: 10-15 working days for a full set
No MOQ: order one set or one hundred
Material: 20CrMnTi or 8620, case-hardened to HRC 58-62
Inspection: 100% dimensional check, report included per batch
Send us your drawing. We will quote firm within 12 hours.
Specifications
Parameter
Value
Available sizes
50 mm, 52 mm, 55 mm, 60 mm (heavy series)
Material options
20CrMnTi, 8620, 9CrSi, or per your spec
Hardening
Carburized or through-hardened, HRC 58-62
Bore tolerance
±0.005 mm
Taper angle tolerance
±0.01°
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on body
Concentricity
≤0.008 mm TIR
Machining process
CNC turning, CNC milling, wire EDM for slots
Heat treatment
In-house vacuum hardening, no decarb layer
Batch size
1 to 5,000 pieces, no MOQ
Inspection
CMM, optical comparator, hardness tester
Marking
Laser engraved size and batch number
We do not outsource the critical steps. Turning, slotting, hardening, and grinding are all inside our factory. That is how we hold the numbers above.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every collet set gets a batch number. That number is tied to the heat treatment furnace log, the machinist, and the CMM report. If you find an issue six months later, we can pull the exact records for that batch. No guesswork.
2. Inspection report per batch.
You do not have to ask for the report. It ships with the parts. Each report lists bore diameter, taper angle, concentricity, and hardness for every collet in the set. PDF copy goes to your email the day we ship.
3. One factory for CNC + stamping + springs + heat sink.
You are not just buying a collet chuck. You are buying a supply chain. If your assembly needs a stamped cover, a compression spring, or an aluminum heat sink, we make those too. One purchase order, one quality system, one freight bill. That is precision manufacturing without the headache of juggling three vendors.
Where these parts are used
Heavy-series auto lathe collets are for machines that do not stop. They hold bar stock and forgings on multi-spindle automatics, Swiss-type lathes, and CNC turning centers.
Holding 50-60 mm round bar for hydraulic valve bodies
Gripping forged gear blanks on a twin-spindle CNC lathe
Clamping thick-walled tube for oilfield connector machining
Securing hardened steel shafts for automotive steering components
The heavy series means thicker walls and more gripping force. That is for interrupted cuts, hard materials, and long cycle times where a light collet would flex.
If your part is over 50 mm and you are fighting runout, this set is the fix.
Q: What is the minimum order quantity?
A: No MOQ. We make one set for prototype or 1,000 sets for production. The unit price drops with quantity, but we do not turn away a single set.
Q: How do you guarantee tolerance and quality?
A: We cut to your drawing, not to a catalog. Each collet is measured on a CMM. The bore is held to ±0.005 mm, taper to ±0.01°. You get the inspection report with the shipment. If a part is out of spec, we replace it at our cost.
Q: What is the lead time for a custom CNC collet chuck?
A: Standard heavy-series sets ship in 10-15 working days. If you need a rush, we can do 5-7 days for an additional 20% expedite fee. Heat treatment is the bottleneck, and we run our own furnace, so we control that schedule.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material and our own heat treatment report. If your customer requires third-party testing, we can arrange SGS or TUV inspection at cost.
Send your drawing
Do not send us a screenshot. Send the actual DXF, STEP, or PDF with dimensions and tolerances.
We will check the design for manufacturability, confirm the material and hardness, and send you a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
One factory. One quote. No MOQ. Your custom CNC collet chuck, made in China, verified before shipment.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.