Custom CNC Collet Chuck Precision Manufacturing Made in China | BQUQ
OpeningYour drawing defines the part. We machine it. Before any box leaves our Dongguan floor, every CNC collet chuck is checked on a CMM and a test run with a master collet. You get a part that seats
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Before any box leaves our Dongguan floor, every CNC collet chuck is checked on a CMM and a test run with a master collet. You get a part that seats true, grips concentric, and repeats within 0.005 mm.
Tolerance: ±0.005 mm on critical diameters
Surface finish: Ra 0.4 µm on taper and gripping surfaces
Lead time: 15–20 working days for custom CNC collet chuck
Batch: 1 piece to 10,000 pieces, no MOQ
Material certs: mill test reports included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years on CNC machining lines. Your chuck is not a side job. It is our core work.
Specifications
Parameter
Value
Material
20CrMnTi, 40Cr, 9Cr18, or per your spec
Hardening
Carburized 58–62 HRC, core 30–40 HRC
Machining
5-axis CNC turning-milling, ID/OD grinding
Key tolerance
Runout ≤ 0.005 mm TIR at nose, taper angle ± 0° 0' 10"
Surface finish
Ra 0.4 µm on taper, Ra 0.8 µm on body
Threads
Class 2B or 3B, pitch per your drawing
Balancing
G2.5 at 3000 RPM optional
Inspection
100% dimensional check, CMM report per batch
Batch size
1–10,000 pieces, no MOQ
Lead time
15 days for prototype, 20 days for production
Packaging
Anti-rust oil, foam insert, export carton
We use Mazak and Doosan CNC lathes with live tooling. Grinding is done on Studer cylindrical grinders. No shortcuts on heat treatment—we run carburizing in-house with batch tracking.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Each custom CNC collet chuck gets a heat number and a work order number. If you need to trace a batch back to the steel coil and the operator, we have the records. No guesswork. No mixed batches.
2. Inspection report per batch
You do not have to ask. Every shipment includes a dimensional inspection report with actual measured values, not just a pass/fail stamp. For critical tapers, we include a roundness and runout chart. This saves your incoming QC hours.
3. One factory for CNC + stamping + springs + heat sinks
Your chuck may sit in an assembly with a stamped housing, a compression spring, and a heat sink. We make all four. You send one drawing package, get one quote, one quality system, one shipping point. Fewer suppliers, fewer delays, fewer arguments.
Where these parts are used
Our CNC collet chucks go into workholding systems for lathes, milling centers, and grinding machines. Common end uses:
Automatic lathe spindles for high-volume turning of small precision parts (watch components, medical screws, electronic pins)
Rotary transfer machines in automotive fuel injector production
Tool presetters and inspection fixtures where repeatable clamping is mandatory
Custom fixtures for Swiss-type CNC lathes in the aerospace fastener industry
Replacement chucks for aging machines where the original supplier no longer exists
In every case, the chuck is the last thing between the spindle and the workpiece. If it wobbles, the part fails. Our tapers are ground to match your master collet, not just to a nominal angle.
Q: What is your MOQ?
A: No MOQ. We machine one piece for a prototype or 10,000 for production. The unit price drops with quantity, but the first piece gets the same inspection as the last.
Q: How do you guarantee tolerance and quality?
A: We grind the taper and gripping diameters in the same setup to eliminate concentricity error. Every piece is measured on a CMM. We send you the report. If a part is out of spec, we replace it at no cost.
Q: What is your lead time for a custom CNC collet chuck?
A: 15 working days for a prototype after drawing approval. Production runs of 100+ pieces take 20 working days. Urgent orders can be expedited to 10 days with a small surcharge.
Q: Can you provide material certificates?
A: Yes. Mill test reports for the raw steel, heat treatment certificates, and hardness test reports are included with every batch. We also keep samples for 12 months.
Send your drawing
Send us your 2D or 3D file. We will check the design for manufacturability, confirm the material and heat treatment, and return a firm quote within 12 hours. No MOQ, no hidden tooling charges. We are a precision manufacturing factory in Dongguan, China, and we have been doing this for 20 years.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Your custom CNC collet chuck, made in China, verified before shipment.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.