Custom CNC Collet Chuck Nut DIN6388 Precision Manufacturing Made in China
OpeningYour drawing defines the part. We machine it, verify it, and ship it. That is the entire process. No guesswork, no substitutions.We build custom CNC collet chucks and DIN6388 collet nuts to you
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it, verify it, and ship it. That is the entire process. No guesswork, no substitutions.
We build custom CNC collet chucks and DIN6388 collet nuts to your exact geometry. Every part is checked against your file before it leaves our floor in Dongguan. If it does not match, it does not ship.
At a glance: ±0.005 mm machining tolerance, 15-day standard lead time, no MOQ, full material traceability.
Specifications
We run a dedicated CNC turning and milling cell for collet chuck bodies and nuts. The table below shows what you can expect when you send us your drawing.
CMM full geometry report, thread plug gauge, taper gauge
Batch size
1 piece to 10,000 pieces
Lead time
15 days for prototypes, 25 days for production runs
Surface treatment
Black oxide, electroless nickel, hard chrome, or as drawn
We do not outsource any critical step. Turning, grinding, heat treatment, and inspection stay in our factory. That gives us control over every micron.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each heat of material gets a unique lot number. That number follows the part through hardening, grinding, and final inspection. If you need to trace a part back to its raw bar stock, we can do it in minutes. We keep records for 10 years.
2. Inspection report per batch. You get a dimensional report with every shipment. It lists bore diameter, taper angle, thread pitch, and runout. We also include hardness test results. No extra charge, no request needed. The report is signed by our QC lead.
3. One factory for CNC + stamping + springs + heatsinks. Your collet chuck is rarely the only part in your assembly. You might need a spring for the collet, a stamped retainer plate, or a heatsink for the spindle motor. We make all of them under one roof. That means one purchase order, one shipping date, and one quality standard. You save freight and you save coordination time.
Where these parts are used
A CNC collet chuck is not a decorative part. It holds the tool or workpiece, and any runout shows up directly in your finished part. Our customers use these chucks in:
Precision milling spindles for mold and die work, where taper accuracy determines surface finish.
CNC lathe live tooling where the collet nut must withstand high RPM without loosening.
Automatic bar feeders for Swiss-type lathes, where the chuck cycles thousands of times per day.
EDM and wire-cut machines that need a rigid, repeatable workholding system.
Custom fixture builds where a standard ER chuck does not fit the spindle nose geometry.
In every case, the buyer is an engineer who knows that a cheap collet nut costs them scrap parts. They send us the drawing because they want the tolerance held, not approximated.
Q: What is your MOQ?
A: No MOQ. We machine one piece for prototype validation or 10,000 pieces for production. The per-unit price drops with quantity, but we do not force you to buy more than you need.
Q: How do you guarantee tolerance and quality?
A: We use a CMM for full geometry verification on every batch. For critical tapers, we use an air gauge with 0.0005 mm resolution. The inspection report is included with your shipment. If a part is out of spec, we replace it at our cost.
Q: What is your lead time for custom CNC collet chucks?
A: Standard lead time is 15 days for prototypes and 25 days for production. If you need a sample for fit testing, we can rush a single piece in 7 days. We will confirm the exact date when we quote your drawing.
Q: Can you provide material certificates?
A: Yes. We supply mill test certificates for the raw material with every batch. For aerospace or medical applications, we can also provide heat treatment certificates and full chemical analysis.
Send your drawing
Stop comparing catalogs. Send us your file and get a firm quote in 12 hours.
We price from your drawing, not from a standard part list. You get a clear quote with material cost, machining cost, surface treatment, and lead time. No hidden fees.
Email your drawing to sc@bquq.com or message us on WhatsApp at +86 13713157787.
Precision manufacturing, made in China, with no MOQ and full traceability. Your drawing is the only thing we need to start.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.