Custom CNC Collet Chuck Precision Manufacturing No MOQ Made in China
OpeningYour drawing defines the part. We machine it. Then we verify it against your specs before shipment. That is the process for every custom CNC collet chuck we produce. No exceptions.We are BQUQ,
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Then we verify it against your specs before shipment. That is the process for every custom CNC collet chuck we produce. No exceptions.
We are BQUQ, a precision manufacturing factory in Dongguan, China. We have run CNC machining lines for 20 years. We also do metal stamping, springs, and heat sinks in the same facility. This means your collet chuck is not outsourced. It is made and checked under one roof.
Tolerance: ±0.005 mm on critical diameters
Surface finish: Ra 0.4 µm on taper and gripping surfaces
Lead time: 7–15 days for prototypes, 15–25 days for production batches
No MOQ – we accept one piece for testing
Specifications
Parameter
Value
Material options
20CrMnTi, 40CrMo, 9Cr18, 65Mn, or customer-specified steel
±0.005 mm on bore and taper; ±0.01 mm on thread pitch
Surface finish
Ra 0.4 µm on taper; Ra 0.8 µm on other functional surfaces
Taper accuracy
AT3 or better per DIN 55026 / ISO 10897
Balancing
G2.5 or better at 10,000 RPM (optional)
Batch size
1 piece to 10,000 pieces
Inspection
100% dimensional check on critical features; CMM report per batch
Marking
Laser engraving of part number, batch code, date
We use CNC lathes with live tooling and 5-axis machining centers. Internal grinding is done on dedicated grinders for taper accuracy. Every chuck is tested with a master collet before packing.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Each batch gets a unique code. Raw material certificates, heat treatment records, and final inspection data are linked to that code. If you need to trace a part back to its steel melt, we can do that in minutes.
2. Inspection report per batch.
You receive a dimensional report for every batch. It lists measured values for bore diameter, taper angle, runout, and hardness. We also include CMM data for complex profiles. No hidden deviations.
3. One factory for CNC + stamping + spring + heatsink.
Your collet chuck might need a spring, a stamped retainer, or a heat sink for the tool holder assembly. We make all of them in-house. That means fewer suppliers, shorter lead times, and one accountable partner.
Where These Parts Are Used
Custom CNC collet chucks from our shop go into real production environments. Common applications include:
CNC lathes and turning centers – for bar feeding and second-operation work where quick changeover matters.
Machining centers – for tool holding in high-speed milling, especially where runout must stay below 0.01 mm.
Automatic screw machines – for Swiss-type and multi-spindle machines that need precision collets for small diameters.
Robotic tool changers – where a chuck must engage and release tools repeatedly without losing positional accuracy.
Aerospace and medical component machining – where material traceability and surface finish are non-negotiable.
We have shipped collet chucks for engine valve guides, dental implant fixtures, and automotive fuel injector bodies. The geometry varies, but the requirement is constant: hold tight, release fast, repeat exactly.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your testing. Production pricing starts at 100 pieces, but you are not forced to order that quantity.
Q: How do you guarantee tolerance and quality?
A: We machine to your drawing, then inspect 100% of critical dimensions. For taper and bore, we use air gauges and CMM. The inspection report is included with shipment. If a part is out of spec, we replace it at no cost.
Q: What is your lead time?
A: Prototypes in 7–15 days after drawing approval. Production batches in 15–25 days, depending on quantity and heat treatment cycle. We will give you a firm date with your quote.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for raw material, heat treatment reports, and hardness test results. All documents are in English and traceable to the batch code.
Send Your Drawing
Send us your 2D or 3D drawing. We will review it for manufacturability and send a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China. We have made custom CNC collet chucks for 20 years. No MOQ, no vague promises. Just a quote and a part that fits your machine.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.