Custom CNC Collet Chuck Guide Bushing Tungsten Precision Made in China
OpeningYour drawing defines the part. We execute it. Every custom CNC collet chuck and guide bushing is machined to your exact print, then verified with a full dimensional report before shipment. No s
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We execute it. Every custom CNC collet chuck and guide bushing is machined to your exact print, then verified with a full dimensional report before shipment. No surprises. No interpretation gaps.
At a glance: Tolerance ±0.005 mm on critical diameters, surface finish Ra 0.4 µm, lead time 7–15 days, no MOQ. One factory. One responsible party.
1. Batch-traceable quality.
Every heat lot and material certificate is recorded. Each batch gets a unique job number. If you need to trace a part back to its raw material, we can do it in minutes. This matters for aerospace, medical, and automotive audits.
2. Inspection report per batch.
You get a dimensional report with every shipment. Not a generic certificate — an actual list of measured values against your tolerances. We use CMM, optical comparators, and air gauges. If a dimension is out, we catch it before packing, not after you install it.
3. One factory for CNC + stamping + springs + heat sinks.
Your assembly may need a CNC collet chuck, a stamped retainer plate, a compression spring, and an aluminum heat sink. Instead of coordinating four suppliers, you send us the whole package. One purchase order. One shipping date. One quality standard. We have run all four lines under one roof for 20 years.
Where These Parts Are Used
Swiss-type CNC collet chucks and guide bushings are not shelf items. They are wear components in high-precision turning centers. Typical applications:
Medical device manufacturing: Guide bushings for machining bone screws, dental implants, and surgical pins. Tolerance and surface finish are non-negotiable.
Aerospace fasteners: Custom collet chucks for titanium and Inconel bolts. Tungsten carbide resists wear when cutting abrasive alloys.
Electronics connectors: Swiss machines producing micro-pins and sockets. The guide bushing controls bar stock whip at high spindle speeds.
Automotive fuel injectors: Needle valves and nozzle bodies require concentricity under 0.005 mm. A worn bushing ruins the part.
Watch and instrument parts: Small diameters, long runs, high repeatability. Tungsten carbide holds its geometry far longer than steel.
If your machine uses a guide bushing, you know the pain of premature wear. We make the replacement that lasts 3–5 times longer than standard HSS, depending on material and coolant.
Q: What is your MOQ?
A: No MOQ. We machine one prototype or a million pieces. The unit price drops with quantity, but we never turn away a single-piece order.
Q: How do you guarantee tolerance and quality?
A: We inspect 100% of critical dimensions on every part. A CMM report is included with each batch. If you request it, we also provide material certificates and hardness test results. Our tolerance is ±0.005 mm on bores and ±0.003 mm TIR on concentricity.
Q: What is the lead time for a custom CNC collet chuck?
A: Prototype (1–5 pieces) ships in 7 days. Production runs ship in 15 days. For urgent breakdowns, we can expedite to 72 hours for standard sizes. Just tell us the machine model and we will check our stock of semi-finished blanks.
Q: Can you provide material certificates?
A: Yes. Every tungsten carbide and steel batch comes with a mill certificate. We keep records for 10 years. If your customer requires full traceability, we provide it without extra cost.
Send Your Drawing
Stop guessing. Send us your PDF or STEP file. We will reply with a firm quote in 12 hours — not a range, not a "starting from" price. A real number based on your geometry, material, and quantity.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Response time: Within 12 business hours
What to include: Drawing (PDF/DWG/STEP), material spec, quantity, target lead time
We are a precision manufacturing factory in Dongguan, China. 20 years of CNC machining, stamping, springs, and heat sinks. No MOQ. No runaround. Send the drawing and get the quote.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.