Precision CNC Machined Drone Camera Mounts | Custom Tolerance, No MOQ
OpeningYour drone camera mount is only as good as its last flight. Vibration, weight, and alignment decide the image quality. We machine mounts to your exact drawing, not a generic stock part. Every u
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drone camera mount is only as good as its last flight. Vibration, weight, and alignment decide the image quality. We machine mounts to your exact drawing, not a generic stock part. Every unit is verified before shipment. You get a part that fits your gimbal, your payload, and your production schedule.
We run a 20-year-old factory in Dongguan, China. Our CNC lines handle aluminum, titanium, and stainless steel. We hold tolerances down to ±0.005 mm on critical features. Lead time is 7–15 days for prototypes, 15–25 days for production runs. No MOQ. Send one drawing or ten thousand units—the price per part drops with quantity, but the quality does not.
At a glance: ±0.005 mm tolerance, 7-day prototype lead time, no MOQ, ISO 9001:2015 certified, in-house CMM inspection.
Tapped or thread-milled, class 2A/3A, with go/no-go gauge verification
Batch Size
1 to 100,000+ pieces
Inspection
100% critical dimension check via CMM; full batch report on request
Certifications
ISO 9001:2015, material certificates (EN 10204 3.1), RoHS/REACH compliance
Lead Time
Prototype: 7 days; Production: 15–25 days after drawing approval
Shipping
DHL, FedEx, UPS, or sea freight; Incoterms EXW or FOB Shenzhen
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality. Each batch gets a unique job number. We track material lot, machine operator, tool wear, and inspection results in our ERP. If a part fails in the field, we can trace it back to the exact heat of aluminum and the exact cutter pass. You get a full traceability report with every shipment.
2. Inspection report per batch. We do not trust the machine alone. Every critical dimension is checked on a CMM (Coordinate Measuring Machine). You receive a dimensional report with actual measured values, not just a pass/fail stamp. For drone mounts, we also check flatness, concentricity, and surface roughness on sealing faces. This report is free with every order.
3. One factory for CNC + stamping + springs + heat sinks. Your drone mount might need a stamped bracket, a compression spring for damping, or a heat sink for the camera sensor. Instead of coordinating three suppliers, you send one drawing package to us. We machine the mount, stamp the bracket, wind the spring, and CNC the heat sink under one roof. Fewer handoffs mean fewer tolerance stack-ups and faster lead times.
Where These Parts Are Used
CNC machined drone camera mounts are not just for consumer quadcopters. We supply parts for:
Industrial inspection drones – payload mounts for LiDAR and thermal cameras, requiring vibration isolation and precise angular alignment.
Agricultural spray drones – camera mounts that survive chemical exposure and high-G maneuvers, often hard-anodized for corrosion resistance.
Delivery drones – lightweight 7075-T6 mounts with integrated strain relief for camera cables, tested for repeated landing impacts.
Cinema and broadcast drones – gimbal mounts for full-frame cameras, where runout below 0.01 mm prevents image wobble.
Defense and surveying UAVs – titanium mounts for high-altitude, high-vibration environments, with passivated surfaces for salt fog resistance.
In every case, the mount is a structural interface. It holds the camera rigidly in flight, isolates high-frequency motor vibration, and transfers heat from the sensor. Our machining process controls all three functions.
Q: Do you really have no MOQ?
A: Yes. We machine a single prototype for $50–$150 depending on material and complexity. Production pricing starts at 50 pieces. No MOQ means you can validate your design before committing to inventory.
Q: How do you guarantee ±0.005 mm tolerance?
A: We use 5-axis CNC mills with thermal compensation. After machining, we inspect on a CMM with a resolution of 0.0001 mm. If a dimension is out of spec, we rework or scrap the part—never ship it. The inspection report shows the actual measured values.
Q: What is the typical lead time for a production order?
A: Prototypes ship in 7 days. Production runs of 500–5,000 pieces ship in 15–25 days after you approve the sample. We can split shipments if you need partial stock sooner. For urgent repairs, we offer a 48-hour express machining service on simple geometries.
Q: Can you provide material certificates?
A: Yes. Every batch comes with an EN 10204 3.1 material certificate from our mill supplier. We also provide RoHS and REACH declarations. If you need third-party testing (e.g., SGS or TÜV), we can arrange it at cost.
Send Your Drawing
Stop guessing if a supplier can hold your tolerance. Send us your 2D or 3D drawing (STEP, IGES, or PDF). We will review the geometry, suggest material and finish options, and return a firm quote within 12 hours. No hidden costs, no vague promises.
Email your drawing to sc@bquq.com or message us on WhatsApp at +86 13713157787. We reply within one business hour, China time.
Precision manufacturing is our only business. Custom CNC machining, made in China, with no MOQ and full traceability. Your drone camera mount deserves a factory that treats microns seriously. Send the drawing. We will prove it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.