Custom CNC Machined Optical Mount Parts | Precision Manufacturing China
OpeningYour optical mount design, machined to your drawing. We do not redesign, we do not substitute materials, and we do not ship without verification. Every part is inspected before it leaves our Do
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your optical mount design, machined to your drawing. We do not redesign, we do not substitute materials, and we do not ship without verification. Every part is inspected before it leaves our Dongguan factory.
Tolerance: ±0.005 mm on critical bores and mating faces
Lead time: 7–12 working days for standard batches
No MOQ: 1 piece or 10,000 pieces, same process control
We have run CNC machines for 20 years. Optical mounts demand flatness, squareness, and repeatability. We deliver that with standard 3-axis and 5-axis machining centers, not special tricks.
7 days (prototype), 12 days (production), expedite available
Certifications
ISO 9001:2015, material certs (EN 10204 3.1) on request
All parts are deburred and cleaned before inspection. We do not skip edge break on optical components – sharp edges cause stress risers and assembly issues.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality
Every batch gets a unique job number. We record machine, operator, tool offsets, and inspection data for each run. If you have a field failure, we trace it to the exact shift and cutting tool. No guesswork.
2. Inspection report per batch
You receive a full dimensional report with every shipment – not a generic certificate. CMM points, surface roughness values, thread pass/fail, and material batch numbers. Your incoming QC can verify in minutes, not hours.
3. One factory for CNC + stamping + springs + heat sinks
Your optical mount often needs a spring-loaded kinematic mount, a stamped base plate, or a heat sink for laser diodes. We make all of them in-house. One purchase order, one logistics point, one quality standard. No multi-vendor coordination.
Where These Parts Are Used
Precision optical mounts from our shop go into:
Laser systems – gimbal mounts, mirror holders, beam steering stages (aluminum 6061-T6, black anodized)
Q: What is your MOQ?
A: No MOQ. We run one prototype piece at the same tolerance as a 10,000-piece order. You pay a small setup fee for small batches, but the unit price drops predictably with volume.
Q: How do you guarantee tolerance and quality?
A: First article inspection (FAI) on every new drawing, CMM verification on critical dimensions, and a full dimensional report with each batch. If a part is out of spec, we remake it at our cost – no questions.
Q: What is your lead time?
A: Prototypes in 7 working days. Production batches (100–1000 pcs) in 10–12 working days. We can expedite to 5 days for urgent builds, but we charge a 30% rush fee.
Q: Do you provide material certificates?
A: Yes. We supply EN 10204 3.1 material certs for metals, and FDA-grade certificates for POM/PEEK on request. Standard shipments include mill test reports.
Send Your Drawing
Email your PDF or STEP file to sc@bquq.com or WhatsApp +86 13713157787. We reply with a firm quote in 12 hours – including price, lead time, and suggested material if your drawing does not specify one.
We are a precision manufacturing factory in Dongguan, China. Custom CNC machining is all we do. No trading company, no middleman, no surprises.
Send your drawing today. We will machine it right.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.