OpeningYour pump’s efficiency lives or dies by the impeller geometry. We machine every impeller directly from your 3D model or 2D drawing. No generic blanks, no re-engineered approximations. We verify
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your pump’s efficiency lives or dies by the impeller geometry. We machine every impeller directly from your 3D model or 2D drawing. No generic blanks, no re-engineered approximations. We verify critical dimensions on a CMM before the parts leave our floor.
At a glance: ±0.01 mm tolerance on machined features, 5-axis CNC capability, lead time from 7 working days, no MOQ.
±0.01 mm on bores and mating faces, ±0.05 mm on blade profiles
Surface finish
Ra 0.4 µm on seal surfaces, Ra 1.6 µm standard, as-machined or bead blasted
Balancing
Dynamic balancing up to G2.5 grade (ISO 1940-1)
Inspection
Full CMM report, surface roughness test, material certs
Batch size
1 piece to 10,000 pieces, no MOQ
Lead time
7–15 working days for prototypes, 15–25 days for production runs
Location
Dongguan, China (factory direct, made in China)
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every impeller gets a unique serial number. We track material heat number, tool paths, machine operator, and inspection results for that serial number. If a field failure happens, we can trace it back to the exact batch and process parameters within hours. You get a full traceability document with every shipment.
2. Inspection report per batch. We don't just say "it's within tolerance." You receive a dimensional report with actual measured values, not pass/fail ticks. For critical features like the hub bore and blade tip radius, we include CMM point-cloud data. This saves your QC team hours of re-verification.
3. One factory for CNC + stamping + springs + heat sinks. Your pump assembly might need a stamped housing, a spring-loaded seal retainer, or a heat sink on the motor driver. We run all four production lines under one roof. You send us the full BOM, we coordinate the machining, stamping, spring coiling, and heat sink fabrication. One purchase order, one shipping date, one responsible party.
Where these parts are used
Our CNC machined pump impellers go into applications where off-the-shelf castings fail. Typical uses include:
Chemical transfer pumps handling corrosive media — we machine impellers from 316L or titanium when standard plastics degrade.
Hydronic heating circulators — closed impellers with tight clearances for quiet, efficient operation.
Marine bilge and engine cooling pumps — bronze impellers that survive saltwater exposure.
Medical device fluid handling — small PEEK impellers for dialysis and infusion pumps, where material purity and dimensional repeatability matter.
Fuel and oil pumps for automotive test stands — custom vane profiles machined to match your flow curve.
Aerospace fuel boost pumps — aluminum impellers with thin blades, machined from solid billet for strength.
If your application needs a non-standard blade count, a specific vane angle, or a hybrid material combination, that's exactly what we do best.
Q: What is your MOQ?
A: No MOQ. We machine one prototype for testing or a thousand pieces for production. The unit price drops with quantity, but we won't turn away a single-piece order.
Q: How do you guarantee tolerance and quality?
A: We hold ±0.01 mm on critical features. Every batch gets a CMM inspection report with actual values. We also provide material certificates and, on request, a full PPAP package for automotive or aerospace buyers.
Q: What is your standard lead time?
A: Prototype impellers ship in 7–10 working days after drawing approval. Production runs of 100+ pieces typically take 15–25 working days. We can expedite to 5 days for an emergency replacement.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all metals and plastics, including heat treatment reports for aluminum and stainless steel. For aerospace or medical work, we can provide full traceability documentation.
Send your drawing
Stop guessing whether a casting will meet your flow curve. Send us your drawing or 3D model, and we'll machine an impeller that matches your design intent exactly.
Get a firm quote within 12 hours. Email your PDF, STEP, or IGES file to sc@bquq.com or message us on WhatsApp at +86 13713157787. We'll reply with pricing, lead time, and a DFM review if we spot any manufacturability issues.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.