Precision CNC Machined Quadcopter Frame Parts | Custom CNC Machining No MOQ
## Opening Your quadcopter frame carries motors, electronics, and flight loads. It must be flat, stiff, and light. We machine it to your drawing. Every part is verified before shipment. No guesswork
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your quadcopter frame carries motors, electronics, and flight loads. It must be flat, stiff, and light. We machine it to your drawing. Every part is verified before shipment. No guesswork. No surprises.
We are a precision manufacturing factory in Dongguan, China. 20 years in CNC machining, stamping, springs, and heat sinks. You send the drawing. We handle the rest.
All parts are deburred and cleaned. Critical dimensions are measured and recorded. You get a PDF inspection report with your shipment.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every batch gets a unique job number. We track material lot, machine, operator, and inspection data. If a part fails in the field, we trace it back in minutes. You get full traceability, not just a box of parts.
2. Inspection report per batch
We measure critical features on every part—not just the first article. You receive a CMM report with actual values, not nominal ones. For flight-critical parts, this is non-negotiable. We do it as standard.
3. One factory for CNC + stamping + springs + heat sinks
Your quadcopter frame might need CNC arms, stamped mounting plates, spring-loaded landing gear, and a heat sink for the ESC. We make all of them under one roof. Fewer suppliers, faster lead times, one point of accountability. That is what precision manufacturing should feel like.
Where these parts are used
CNC machined quadcopter frame parts go into more than hobby drones. We supply parts for:
Racing drones – 5-inch and 7-inch frames, camera mounts, motor bases. Tight tolerances keep vibration low.
Industrial inspection drones – Larger frames for LiDAR and thermal cameras. Stiffness matters at altitude.
Delivery drones – Payload hooks, battery trays, folding arm mechanisms. Repeatable batch quality for fleet builds.
Military and defense UAVs – TC4 titanium parts for high-load joints. Material certs and batch traceability required.
We also machine custom parts for gimbals, antenna mounts, and ground control stations. If it flies, we can make the frame.
Questions buyers ask before ordering
Q: Do you really have no MOQ?
Yes. We machine 1 piece for prototypes and 10,000 pieces for production. The unit price is higher for small batches, but you never pay for minimum quantities you do not need. This is custom CNC machining made flexible.
Q: What tolerance and quality control can I expect?
Standard tolerance is ±0.01 mm on critical features. We use CMM inspection on every batch. You get a report with actual measured values. For flight-critical parts, we can add 100% inspection at extra cost.
Q: What is the lead time for a typical order?
Prototypes ship in 7 days. Production runs of 100–500 pieces ship in 10–15 days. If you need faster, we can expedite for a fee. We quote exact dates with your order confirmation.
Q: Can you provide material certificates?
Yes. We provide mill certificates for aluminum, titanium, and steel. For aerospace or defense work, we can provide full traceability including heat lot and chemical composition. Just specify on your RFQ.
Send your drawing
We quote firm prices in 12 hours. Send your drawing in STEP, IGES, or PDF. We will review the design, suggest improvements if needed, and give you a clear quote with lead time.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China. No MOQ. No runaround. Just machined parts that fit your drone the first time. Send your drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.