Custom CNC Machined Auto Lathe 20 Type Hex Bore Spring Collet | No MOQ
OpeningThis is a precision-machined auto lathe 20-type spring collet with a hex bore, made to your exact drawing. We do not stock generic blanks. Every collet is cut, heat-treated, and ground in our D
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
This is a precision-machined auto lathe 20-type spring collet with a hex bore, made to your exact drawing. We do not stock generic blanks. Every collet is cut, heat-treated, and ground in our Dongguan factory, then verified for bore geometry and spring tension before shipment.
If your drawing specifies a hex bore for a 20-type auto lathe spindle, we hold the internal hex to tight angular and dimensional limits. The result is a collet that grips the workpiece without deformation and releases cleanly.
At a glance: Tolerance ±0.005 mm on bore and hex, lead time 7–12 days, no MOQ, material certs included.
Specifications
Parameter
Value
Material options
65Mn spring steel, 60Si2MnA, 9Cr18 stainless, or per drawing
Hardness
HRC 42–48 (spring temper), optional HRC 50–55 for wear resistance
All collets are made in China under ISO 9001:2015 process control. We use the same fixtures for a 1-piece sample and a 10,000-piece run, so the first article matches the last.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each heat treatment batch gets a unique code. We record furnace temperature curves and hardness readings for that code. If you need to trace a failure, we can show you the exact process data for your collet's batch. No mixing of batches, no lost records.
2. Inspection report per batch. You get a dimensional report with actual measured values, not just a pass/fail stamp. For hex bores, we measure across flats at three depths and report angular error. For taper seats, we check contact area with a master gauge. The report is emailed with your shipment.
3. One factory for CNC, stamping, springs, and heat sinks. Your collet chuck assembly often needs a spring, a stamped retainer, or a heat sink for the spindle motor. We run all four lines under one roof. You send us the whole assembly drawing, we coordinate the parts internally, and you receive one shipment with one set of documents. Fewer suppliers, shorter lead time, no finger-pointing.
Where these parts are used
The 20-type hex bore collet is standard for Swiss-type automatic lathes and small CNC turning centers that drive hex bar stock. Typical applications:
Hex fasteners: Screws, bolts, and nuts machined from hex bar. The collet holds the hex profile so the cutter can form threads, heads, and chamfers without the stock rotating in the grip.
Hydraulic fittings: Hex bodies for valves, adapters, and quick couplings. The bore keeps the part oriented for cross-drilling or milling flats.
Electrical connectors: Hex brass or copper inserts for terminals and bushings. The collet's concentricity prevents wall-thickness variation on thin-walled parts.
Medical device components: Small titanium or stainless hex parts for surgical instruments. The spring temper holds delicate stock without marking the surface.
Automotive sensors: Hex sensor bodies for ABS and pressure monitoring. Batch consistency matters here—our ±0.005 mm bore tolerance keeps every part seated the same way.
If your spindle uses a 20-type taper, this collet fits standard 20-type collet chucks. We can also modify the taper angle or head style per your chuck's specification.
Q: What is the minimum order quantity?
A: No MOQ. We make one piece for prototyping at the same per-piece quality as a production run. Tooling and setup are included in the unit price, not charged separately.
Q: How do you guarantee tolerance on the hex bore?
A: We cut the hex with wire EDM, then grind the bore if your drawing requires it. Every collet is checked with a calibrated hex plug gauge at three depths. The inspection report shows the actual measured values.
Q: What is the lead time for a custom collet?
A: Prototype in 7 days, production batch in 12 days from drawing approval. For urgent orders, we can expedite to 5 days at a 15% surcharge.
Q: Do you provide material certificates?
A: Yes. Each batch includes a mill certificate for the raw material and our heat treatment report. For aerospace or medical applications, we can provide full traceability documentation at no extra cost.
Send your drawing
Send us your drawing in PDF, STEP, or IGES format. We will review the hex dimensions, taper angle, and material specification, then send you a firm quote within 12 hours. No obligation, no design fee for standard 20-type collets.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China, with 20 years of experience in CNC machining, stamping, springs, and heat sinks. Your custom CNC collet chuck is made to your drawing, verified before shipment, and backed by a batch-traceable quality record.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.