OpeningYour drawing defines the part. We machine it. Every collet chuck we ship is made to your exact print, then verified before it leaves the factory. No surprises.Tolerance: ±0.005 mm on critical d
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Every collet chuck we ship is made to your exact print, then verified before it leaves the factory. No surprises.
Tolerance: ±0.005 mm on critical diameters
Lead time: 10–15 working days for standard batches
No MOQ – one piece or ten thousand
Material certs and inspection report included with every batch
This is a 25-type collet chuck with a waist slot detail. The waist slot is machined for precise clamping force distribution and chip clearance. We hold the slot width and depth to your spec, not a generic standard.
HRC 52–58 (case hardened) or HRC 40–45 (through hardened)
Outer diameter range
10 mm – 50 mm
Waist slot width tolerance
±0.01 mm
Concentricity (OD to bore)
≤0.005 mm
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on OD
Machines
Citizen L20, Star SR-20, Tsugami B020, CNC Swiss lathes
Secondary operations
Wire EDM for slot, internal grinding for bore, lapping
Heat treatment
Carburizing, induction hardening, or vacuum hardening in-house
Batch size
1 – 100,000 pcs
Inspection
100% dimensional check on critical features, CMM report per batch
Lead time
10 days for prototypes, 15 days for production runs
We run 25-type collets on Swiss-type auto lathes. The waist slot is cut after heat treatment to avoid distortion. We grind the bore after slotting to maintain concentricity. This is the sequence that works.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique job number. Raw material heat number, machine operator, inspection results – all linked to that number. If you have a problem six months later, we trace it back in minutes. No guesswork.
2. Inspection report per batch.
You get a dimensional report with every shipment. Critical features measured on a CMM, recorded, and signed. The report covers slot width, OD, bore, concentricity, and hardness. You do not have to ask for it – it is standard.
3. One factory for CNC + stamping + spring + heatsink.
Your collet chuck is not the only part you need. We also run stamping presses, spring coiling machines, and heatsink fabrication lines. You send us a full assembly drawing, we quote the whole thing. One supplier, one invoice, one quality standard. Less coordination on your side.
Where these parts are used
A 25-type collet chuck with a waist slot is not a generic part. It is used where clamping accuracy and repeatability matter.
Swiss-type CNC lathes – holding bar stock from 5 mm to 25 mm diameter for medical screws, dental implants, and watch components.
Automatic screw machines – for high-volume production of brass fittings, valve cores, and connector pins.
Tool grinding machines – clamping round tool blanks for flute grinding and end mill manufacturing.
Precision assembly fixtures – where a collet holds a shaft while a press-fit operation happens.
Aerospace fastener production – titanium and Inconel bolts need a collet that does not mark the surface. Our waist slot design reduces contact pressure.
The waist slot detail is not decorative. It allows the collet to flex evenly, so clamping force is consistent across the full length of the bore. That means less runout and longer tool life on your machine.
Q: What is your MOQ?
A: No MOQ. We make one piece for prototyping or 50,000 for production. The unit price drops with quantity, but the quality standard does not change.
Q: How do you guarantee tolerance and quality?
A: We machine to your drawing, not to a catalog standard. After heat treatment, we grind the bore and slot. Every part is checked against your print. A CMM report is included with each batch. If a dimension is out of spec, we do not ship it.
Q: What is your lead time?
A: 10 working days for prototypes, 15 working days for production runs. If you need faster, tell us – we can split the batch and ship partial lots.
Q: Do you provide material certificates?
A: Yes. We supply mill certificates for raw material with every batch. Hardness test reports and heat treatment records are also available on request.
Send your drawing
Email your 2D drawing or 3D model to sc@bquq.com. We reply with a firm quote within 12 hours. Include your target quantity, material, and any special requirements.
For urgent inquiries, WhatsApp us at +86 13713157787.
Precision manufacturing, made in China, with no MOQ and no compromises. Your drawing is the starting point. We handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.