OpeningYour drawing defines the geometry. We define the tolerances. This 36 Type Hex Bore Extended Collet is machined from your exact specifications, not from a stock catalog. Every unit is verified b
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the geometry. We define the tolerances. This 36 Type Hex Bore Extended Collet is machined from your exact specifications, not from a stock catalog. Every unit is verified before shipment with a full dimensional report. If it doesn't match your print, it doesn't leave the factory.
At a glance: Tolerance ±0.005 mm on bore and hex dimensions, surface finish Ra 0.4 µm, lead time 7–10 working days, no MOQ. One piece or one thousand pieces, same process control.
Specifications
We run these collets on Citizen and Tsugami CNC auto lathes, then finish the hex bore with wire EDM for zero burr. Material is sourced with mill certs. Hardness is checked on every batch.
Parameter
Value
Material
42CrMo4 (AISI 4140) or 9Cr18 (AISI 440C) per drawing
Hardness
48–52 HRC (through-hardened)
Bore tolerance
±0.005 mm on hex width across flats
Concentricity
≤0.008 mm TIR to shank
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on OD
Extended nose length
10–50 mm as specified
Shank diameter
19.05 mm (3/4") or 25.4 mm (1") standard, custom on request
7 days for prototypes, 10 days for production runs
Country of origin
Made in China, Dongguan factory
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every collet gets a unique batch number. Heat treatment records, material certs, and inspection data are linked to that number. If a problem appears in your spindle after six months, we can trace it back to the exact melt and heat treat cycle. No guesswork.
2. Inspection report per batch. You get a CMM report with actual measured values, not just a pass/fail stamp. We measure hex width, concentricity, and surface finish on three samples per batch minimum. For critical dimensions, we measure 100% of parts. The report is emailed with your shipment.
3. One factory for CNC, stamping, springs, and heat sinks. Your collet chuck is not an isolated part. If your assembly also needs a spring retainer, a stamped housing, or a heat sink for the drive motor, we make them under the same roof. One purchase order, one quality system, one shipping date. You avoid the chaos of coordinating three suppliers.
Where these parts are used
The 36 Type Hex Bore Extended Collet is built for high-speed rotary applications where a standard round bore cannot grip the workpiece. Common uses include:
Swiss-type lathe guide bushings for hex bar stock in medical screw manufacturing. The extended nose reaches deep into the guide bushing area, reducing bar vibration.
Rotary transfer machines for automotive fuel injector bodies. Hex bore holds the part against torque during cross-drilling, eliminating the need for a secondary milling op.
CNC tool holders for hex shank end mills and taps. The extended design allows the collet to clear deep pockets in the tool holder body.
Pneumatic actuators where a hex drive shaft must be gripped without marring the surface. The hardened bore resists wear from repeated insertions.
Custom automation fixtures for hex-headed fasteners in assembly lines. Extended length provides clearance over protruding threads.
If your application involves hex stock, hex shanks, or torque transmission, this collet is the interface that makes it repeatable.
Q: Is there really no MOQ?
A: Correct. We machine one piece for prototype validation at the same per-unit cost structure as a 100-piece run. The setup is the cost driver, not the quantity. Many buyers order 2–3 pieces first to test fit and runout in their spindle.
Q: What tolerance can you hold on the hex bore?
A: ±0.005 mm on width across flats is our standard. If your drawing calls for ±0.003 mm, we can hold it with wire EDM and a final hone pass. We will confirm capability before quoting. We never accept a print we cannot hold.
Q: What is your actual lead time?
A: Prototypes ship in 7 working days. Production runs of up to 1,000 pieces ship in 10 working days. Larger orders add 3–5 days for heat treatment and grinding. We quote the exact date with your order confirmation, not a vague promise.
Q: Do you provide material certificates and heat treat reports?
A: Yes. Every batch includes a mill certificate for the raw material and a heat treat report with hardness values. These are included free of charge. Third-party inspection (SGS, BV) is available at cost.
Send your drawing
Stop guessing whether a stock collet will fit. Send us your drawing and get a firm quote in 12 hours. We will confirm material, tolerance, and lead time before you commit. No MOQ, no hidden tooling fees.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is not a slogan. It is our daily process. Send the PDF, get the price, test the part.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.