Custom CNC Collet Chuck 42 Type Square Bar Stock Precision Made
OpeningYour drawing defines the part. We machine it. Every custom CNC collet chuck is made to your exact geometry, verified before shipment. No guesswork.At a glance: Tolerance ±0.005 mm on bore and s
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
1. Batch-traceable quality. Each batch gets a unique number. You can trace material heat number, heat treatment record, and inspection data back to the exact production run. If a problem appears in your assembly line, we identify the cause in minutes, not days.
2. Inspection report per batch. You receive a full dimensional report with every shipment. CMM data, hardness readings, surface roughness values. Not a generic certificate. Real numbers from real measurements. Your incoming QC signs off faster.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck is not the only part in your machine. We also make the springs inside the chuck, the stamped washers, and the heatsink for your spindle motor. One purchase order, one logistics point, one quality standard. Fewer suppliers means fewer headaches.
Where these parts are used
This 42-type collet chuck with square bar stock is designed for automatic lathes and CNC turning centers that feed square or hexagonal bar stock.
Typical applications:
Swiss-type automatic lathes (Citizen, Star, Tsugami) running square brass or aluminum bars for electrical connectors.
Multi-spindle automatics processing square steel stock for hydraulic fittings.
CNC turning centers with bar feeders handling square 42 mm stock for automotive sensor housings.
Precision instrument spindles requiring square bar clamping with zero runout.
The square bore holds the bar firmly without rotation. The slot allows radial compression. The hardened surface resists wear from continuous bar feeding. You get stable machining, fewer rejects, longer tool life.
Q: What is your minimum order quantity?
A: No MOQ. We make one prototype for your validation, then scale to your production volume. Many buyers start with 5 pieces for testing, then order 500 or 5,000.
Q: How do you control tolerance and quality?
A: We use CNC lathes and grinders with in-process gauging. Every critical dimension is measured on a CMM. We send you the inspection report before shipment. If a dimension is out of spec, we rework or scrap it. You never receive a bad part.
Q: What is your lead time?
A: Prototype in 7 days. Production in 15 days after drawing approval. For urgent orders, we can expedite to 5 days for an additional charge. We ship worldwide via DHL, FedEx, or your freight forwarder.
Q: Can you provide material certificates?
A: Yes. We provide mill certificates for raw material, heat treatment reports, and hardness test certificates. All documents are in English and available with your shipment.
Send your drawing
We reply with a firm quote within 12 hours. No vague estimates. You get unit price, tooling cost (if any), lead time, and delivery terms. Send your 2D or 3D drawing in PDF, STEP, or IGES format.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is our only business. Your custom CNC collet chuck is made right, measured right, shipped right. Send the drawing. Get the quote.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.