Precision CNC Collet Chuck Auto Lathe 46 Square Bore Custom Made in China
OpeningYou need a collet chuck that holds tight, repeats true, and fits your auto lathe spindle exactly. We machine it from your drawing, not from a catalog guess. Every bore, every taper, every threa
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
You need a collet chuck that holds tight, repeats true, and fits your auto lathe spindle exactly. We machine it from your drawing, not from a catalog guess. Every bore, every taper, every thread is cut to your specified geometry. Before shipment, each chuck is checked on a CMM and a test bar runout is recorded. You get the report, not just the part.
Tolerance: ±0.005 mm on bore and taper
Surface finish: Ra 0.4 µm on gripping surfaces
Lead time: 7–12 working days for standard steel, 15 days for hardened
No MOQ – one piece or one thousand, same process control
Made in China, Dongguan factory, 20 years in precision manufacturing
CMM full geometry, test bar runout, hardness tester, magnetic particle check
Batch size
1 to 5000 pcs, no MOQ
Lead time
7 days (soft), 12 days (hardened), 15 days (with balancing)
We use Swiss-type auto lathes for the body and dedicated internal grinders for the bore. The square bore is cut with wire EDM, not broaching, so corners are sharp and stress-free. Each chuck is serialized. Batch records include heat treat furnace logs and material heat numbers.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every heat lot is separated. We keep a sample from each batch for 24 months. If you have a failure in the field, we can trace the material, the heat treat cycle, and the operator. That is not common for collet chucks made in China – we do it as standard.
2. Inspection report per batch. You get a dimensional report with actual measured values, not just a pass/fail. Runout, bore size, taper angle, hardness – all printed and signed. For critical orders, we include the CMM scan data file. You can verify without re-measuring everything.
3. One factory for CNC + stamping + springs + heat sinks. Your collet chuck is not an isolated part. If your assembly also needs a spring, a stamped bracket, or a heat sink, we make them under the same roof. One purchase order, one quality system, one shipping date. Fewer suppliers means fewer surprises.
Where these parts are used
Swiss-type CNC auto lathes – main spindle and sub-spindle collets for bar stock up to 46 mm. Common on Citizen, Star, and Tsugami machines.
Multi-spindle automatics – square bore collets for hex or square stock in screw machines. Used in high-volume brass and aluminum parts.
Hydraulic and pneumatic chuck systems – replacement collets for quick-change tooling on CNC turning centers.
Medical device machining – small diameter collets for titanium and stainless pins, where runout below 0.005 mm is mandatory.
Automotive fuel injector components – hardened collets for grinding and turning of needle valves and nozzles.
Aerospace fasteners – hex and square collets for bolt blanks, where surface finish and repeatability affect thread rolling quality.
In all these cases, the collet chuck is the last thing between the spindle and the part. If it does not grip true, nothing else matters.
Q: What is your MOQ?
A: No MOQ. We make one piece for prototypes and thousands for production. The per-piece price drops with quantity, but the quality process is identical.
Q: How do you guarantee tolerance and quality?
A: We cut to your drawing, not to a standard. Each chuck is measured on a CMM and a test bar runout is checked. You receive the inspection report with the shipment. If any dimension is out of spec, we replace it at no cost, including freight.
Q: What is your lead time?
A: 7 working days for soft steel, 12 for hardened, 15 if you need balancing. For urgent orders, we can expedite to 5 days at a 20% surcharge. We ship via DHL, FedEx, or your forwarder.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw material, heat treat reports with furnace curves, and hardness test results. All documents are in English and stamped by our QC department.
Send your drawing
Email your PDF or STEP file to sc@bquq.com. Include the spindle taper, bore size, and any special requirements. We will reply with a firm quote within 12 hours – not a range, a fixed price per piece and a delivery date. For urgent discussions, WhatsApp +86 13713157787.
No MOQ. No minimum order value. Just a custom CNC collet chuck, machined to your drawing, verified before shipment, made in China. Send the drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.