Custom CNC Collet Chuck 50 Type Auto Lathe Round Bar Stock
Your drawing defines the part. We machine it. Every collet is verified before shipment. No guesswork. No tolerance surprises.This is a 50 Type collet for auto lathes, machined from round
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Every collet is verified before shipment. No guesswork. No tolerance surprises.
This is a 50 Type collet for auto lathes, machined from round bar stock. It fits standard 50 Type spindle noses. The bore, thread, and taper are cut to your exact dimensions. We check each one with a coordinate measuring machine (CMM) before it leaves the floor.
Tolerance: ±0.005 mm on bore and taper
Lead time: 7–12 days for standard batches
No MOQ — order one piece or one thousand
Material: 20CrMnTi, 40Cr, or 65Mn steel, case-hardened to HRC 58–62
Surface: ground finish, Ra 0.4 µm on critical faces
Specifications
Parameter
Value
Type
50 Type auto lathe collet
Material
20CrMnTi, 40Cr, 65Mn, or customer-specified
Hardness
HRC 58–62 (case-hardened)
Tolerance
±0.005 mm on bore, taper, and thread
Surface finish
Ra 0.4 µm on ground surfaces
Machining process
CNC turning, milling, grinding, heat treatment
Inspection
100% CMM check, report per batch
Batch size
1–10,000 pieces
Lead time
7–12 days standard, 3–5 days for prototypes
Certification
Material certs, heat treatment report, dimensional report
We use CNC Swiss-type lathes and cylindrical grinders for the bore and taper. Heat treatment is done in-house in a controlled vacuum furnace. This gives us full control over hardness and distortion.
T
hree reasons buyers send us their drawings 1. Batch-traceable quality. Every batch gets a unique lot number. We record material heat numbers, machine settings, and inspection results. If a problem shows up in your line, we trace it back to the exact batch in minutes. You get a full report with every shipment.
2. Inspection report per batch. We do not sample. We measure every collet. Bore diameter, taper angle, thread pitch, concentricity — all checked on a CMM. The report is included with your parts. No extra charge. This is standard for us, not a premium service.
3. One factory for CNC, stamping, springs, and heat sinks. You send us one drawing package. We handle the collet, the spring-loaded pusher, the stamped washer, and the heat sink for your spindle motor. One supplier, one quality system, one shipping address. Fewer emails, fewer delays, fewer excuses.
W
here these parts are used 50 Type collets are common in high-volume turning shops. They hold round bar stock in auto lathes and Swiss-type machines. Typical applications:
Electrical connectors — brass and copper terminals, contact pins.
Hydraulic fittings — small bore adapters, check valve bodies.
In each case, the collet must grip the bar stock without marring it. The bore tolerance and surface finish determine whether your parts run at 8,000 RPM without vibration. We machine the bore to your exact stock diameter, with a relief for chip clearance.
Q
uestions buyers ask before ordering Q: What is your MOQ? A: No MOQ. We machine one prototype or a full production run. Prototypes ship in 5 days. Production batches of 100–10,000 pieces ship in 7–12 days.
Q: How do you guarantee tolerance and quality? A: Every collet is measured on a CMM. We send you the dimensional report with the shipment. If any part is out of spec, we replace it at no cost. Our tolerance is ±0.005 mm on critical features, verified per piece.
Q: What is your lead time for a custom design? A: For a standard 50 Type collet with your bore and thread dimensions, lead time is 7 days. For a fully custom design with new drawings, add 3–5 days for tooling and programming. We quote firm lead times with every order.
Q: Do you provide material certificates? A: Yes. Every batch includes a material certificate with heat number, chemical composition, and hardness test results. We also provide heat treatment reports and full dimensional inspection reports. All documents are in English.
S
end your drawing Send us your drawing. Get a firm quote in 12 hours. We will review the material, tolerance, and quantity. If we see a way to reduce cost, we will tell you.
Email: sc@bquq.com WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ. Your custom CNC collet chuck starts with a drawing. Send it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.