Custom CNC Collet Chuck Clamping Setup | Two Collets, Made in China
OpeningYour drawing defines the part. We machine it exactly to that drawing. Every custom CNC collet chuck is verified before shipment. No exceptions.This is a two-collet clamping setup for auto lathe
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it exactly to that drawing. Every custom CNC collet chuck is verified before shipment. No exceptions.
This is a two-collet clamping setup for auto lathe applications. One chuck body, two independent collets. Designed for high-speed, high-repeatability bar work. We build it from your print, your material spec, your tolerance callouts.
Tolerance: ±0.005 mm on critical diameters
Lead time: 15 working days for standard steel alloys
No MOQ — order one piece or one thousand
100% inspection report included per batch
Precision manufacturing, made in China, exported worldwide
Carburized to 58–62 HRC (case depth 0.5–0.8 mm) or through-hardened 40–45 HRC
Machining process
CNC turning, CNC milling, wire EDM for collet slots, cylindrical grinding for OD/ID
Tolerance
±0.005 mm on bore and taper; ±0.01 mm on slot width
Surface finish
Ra 0.4 µm on taper and gripping surfaces; Ra 1.6 µm elsewhere
Collet count
2 (independent, replaceable)
Clamping range
±0.2 mm per collet (adjustable via taper)
Max RPM
6,000 (balanced)
Batch size
1 to 10,000+
Inspection
CMM report, hardness test, surface roughness check per batch
Lead time
15 working days (prototype), 20–25 working days (production)
We use only new, certified bar stock. No recycled material. Each batch is traceable to the heat number.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every custom CNC collet chuck gets a unique batch number. We record material heat, machine settings, operator, and inspection results. If you need to trace a part back to its raw bar, we can do that in minutes. This matters for automotive and medical audits.
2. Inspection report per batch
You get a full dimensional report with every shipment. CMM data for critical tapers, bore diameters, and slot positions. Hardness values. Surface finish readings. No extra cost. No "we checked it, trust us." You see the numbers.
3. One factory for CNC + stamping + springs + heat sinks
Your collet chuck is not an isolated part. It sits in a machine that also uses springs, stamped retainers, or heat sinks. We make all of those in the same building. One engineering team, one quality system, one shipping point. Fewer suppliers, fewer miscommunications, faster assembly for your end product.
Where these parts are used
A two-collet clamping setup is not a generic tool. It is used where you need two separate gripping zones on one workpiece.
Swiss-type auto lathes for long, slender parts. The front collet supports the cut, the rear collet feeds the bar.
Multi-spindle automatics where two diameters must be held concentric to each other.
Secondary operations on CNC lathes: you clamp a pre-machined part, then drill or mill a cross-hole without re-fixturing.
High-volume pin and shaft production — the two collets distribute clamping force evenly, reducing distortion on thin-walled parts.
Medical device manufacturing where surface finish and concentricity are critical (guidewires, bone screws, small implants).
If your part spins, we can hold it. If your part needs two clamping points, this setup is the answer.
Q: Is there really no MOQ?
A: Correct. We machine one prototype or a full production run. The price per piece drops with quantity, but we do not force you to buy more than you need. Many buyers start with one sample, test it, then scale up.
Q: What tolerance can you hold on a collet chuck?
A: ±0.005 mm on the bore and taper is our standard for hardened steel. On the collet slots, we hold ±0.01 mm. If you need tighter, we can discuss grinding to ±0.002 mm, but that adds lead time and cost.
Q: How fast can I get parts?
A: Prototype: 15 working days after drawing approval. Production: 20–25 working days. For urgent orders, we can expedite to 10 days for a 30% surcharge. We ship via DHL, FedEx, or air freight — you choose.
Q: Do you provide material certificates?
A: Yes. Every batch ships with a mill test certificate (MTC) and our own inspection report. If you need a third-party inspection (SGS, BV), we can arrange that at cost. We do not charge extra for standard documentation.
Send your drawing
Stop guessing. Send us your PDF, STEP, or IGES file. We will review the geometry, material, and tolerance callouts. You get a firm quote in 12 hours. No hidden fees, no vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is what we do. Custom CNC collet chuck, made in China, no MOQ. Your drawing is the only thing we need to start.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.