Custom CNC Collet Chuck Large Series 42 45 46 48 | BQUQ
We machine these large-series collets to your exact drawing. No stock adjustments. No guesswork. Every unit is verified for concentricity and taper angle before shipment.Tolerance: 0.005
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine these large-series collets to your exact drawing. No stock adjustments. No guesswork. Every unit is verified for concentricity and taper angle before shipment.
Tolerance: 0.005 mm on bore and taper
Lead time: 7–12 working days
No MOQ—order one piece or one thousand
Material: 20CrMnTi or 8620, carburized to 58–62 HRC
Made in China, shipped with batch inspection report
If you are holding a 42, 45, 46, or 48 mm collet chuck, send us the print. We build the collet set to match your machine spindle and workholding system.
Specifications
Parameter
Value
Available sizes
42 mm, 45 mm, 46 mm, 48 mm (large series)
Material options
20CrMnTi, 8620, 9Cr18, 40CrMo
Hardness
58–62 HRC (case-hardened)
Bore tolerance
±0.005 mm
Taper angle tolerance
±0.005 mm on major diameter
Concentricity (TIR)
≤0.01 mm at nose
Surface finish
Ra 0.4 μm on bore, Ra 0.8 μm on body
Heat treatment
Carburizing + quenching + tempering
Process
CNC turning, CNC grinding, wire EDM (for slots)
Batch size
1–5000 pcs, no MOQ
Inspection
100% dimensional check, CMM report per batch
Lead time
7 days (prototype), 12 days (production)
We use CNC grinding for the taper and bore. This gives repeatable geometry across the whole set. Slots are cut by wire EDM, so the spring segments flex evenly under clamping load.
T
hree reasons buyers send us their drawings 1. Batch-traceable quality. Each collet is laser-marked with a batch number. We keep a sample from every heat-treat lot for 24 months. If you have a problem on the line, we trace it back to the exact material batch and machine cycle.
2. Inspection report per batch. You get a CMM report with every shipment. It lists bore diameter, taper angle, TIR, and hardness for each collet. No averages. No "representative sample." Every part is measured.
3. One factory for CNC + stamping + springs + heat sinks. We run four production lines under one roof. Your collet chuck order can be combined with spring collets, stamping fixtures, or heat sink components. Fewer suppliers, one quality system, one shipping point. This cuts your logistics cost and inspection time.
W
here these parts are used Large-series collet chucks are common in high-volume turning of bar stock and forgings. Typical applications:
Automotive: Machining steering knuckles, axle shafts, and transmission gears from 42–48 mm bar.
Hydraulics: Clamping piston rods and cylinder barrels for valve blocks.
Aerospace: Holding titanium and Inconel blanks for precision turning of bushings and sleeves.
Fastener industry: Producing hex bolts and socket screws from cold-drawn bar.
General machining: Retrofitting older lathes with a precision collet system for short-run jobs.
The 46 mm and 48 mm sizes are often used on multi-spindle automatics (e.g., Tornos, Esco, Index). The 42 mm and 45 mm sizes fit single-spindle CNC lathes with a through-hole capacity of 42–45 mm.
Q
uestions buyers ask before ordering Q: What is the MOQ? No MOQ. We make one collet or a full set of 20. The unit price is higher for single pieces, but the tooling cost is zero—we use standard blanks.
Q: How do you guarantee tolerance and quality? We grind the taper and bore in the same setup. This eliminates indexing error. Then we check every collet on a CMM with a calibrated master mandrel. The inspection report is included in the shipment.
Q: What is your lead time for a custom collet set? Prototype (1–5 pcs): 7 working days. Production (50+ pcs): 12 working days. If you need faster, we can split the order—ship the first batch in 5 days, the rest in 10.
Q: Can you provide material certificates? Yes. We supply mill certificates for the raw material and heat-treatment reports. For aerospace or medical orders, we can add full traceability documentation at no extra cost.
S
end your drawing Send us your PDF or STEP file. We will reply with a firm quote within 12 hours. The quote includes unit price, tooling cost (if any), and delivery date.
Email: sc@bquq.com WhatsApp: +86 13713157787
We are precision manufacturing engineers, not sales clerks. You get straight answers about tolerances, materials, and lead times. No MOQ, no hidden fees, no surprises. Send the drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.