Custom CNC Collet Chuck Non-Standard Hex Bore Auto Lathe Parts
OpeningYour drawing becomes a finished collet chuck, not a compromise. We machine it from raw stock to your exact hex bore dimensions, then verify the bore and taper before shipment. No guesswork, no
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing becomes a finished collet chuck, not a compromise. We machine it from raw stock to your exact hex bore dimensions, then verify the bore and taper before shipment. No guesswork, no “close enough.”
Tolerance: ±0.005 mm on bore and taper
Lead time: 7–12 working days for prototypes
No MOQ: order one piece or one thousand
Material: 20CrMnTi, 65Mn, or 9CrSi, case-hardened to HRC 58–62
Inspection report included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years of CNC machining experience. This collet chuck is made for auto lathes, CNC lathes, and Swiss-type machines where a standard round bore fails. If the hex size, taper angle, or slot geometry is non-standard, we make it exactly.
7–12 days for prototypes, 15–20 days for production
Based on complexity
Every collet is individually serial-numbered. The inspection report lists bore size, taper angle, hardness, and surface finish. We keep a sample from each batch for 12 months.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each heat treatment batch is logged with furnace number and time. Each machining batch has its own inspection record. If a problem shows up on your line, we can trace it to the exact operation and operator. You get a PDF report with actual measured values, not just a pass/fail sticker.
2. Inspection report per batch.
We use a CMM (coordinate measuring machine) for taper and bore geometry, a Rockwell hardness tester for HRC, and a profilometer for surface roughness. The report is sent with the shipment. You do not need to re-inspect every piece—spot-check and trust the numbers.
3. One factory for CNC + stamping + springs + heat sinks.
Your collet chuck might need a spring retainer, a stamped washer, or a heat sink for the spindle motor. We make all of those in the same building. You send one drawing package, we coordinate the processes, and you receive one shipment with one invoice. Fewer suppliers, fewer delays, fewer arguments.
Where these parts are used
Custom CNC collet chucks with hex bores are not shelf items. They show up in specific, high-volume production lines:
Auto lathe bar feeders: Holding hexagonal bar stock (brass, aluminum, steel) for screw machine parts like fittings, valves, and connectors. The hex bore prevents rotation during machining.
Swiss-type CNC lathes: For small-diameter hex stock in medical device components—bone screws, dental implants, and surgical instrument parts where round collets slip.
Hydraulic and pneumatic fittings: Machining hex blanks for banjo bolts, pipe plugs, and coupling nuts. The collet holds the hex firmly without marking the surface.
Fastener manufacturing: Driving hex socket heads for cap screws and set screws in secondary operations like slotting or cross-drilling.
Custom spindle adapters: When a machine has a non-standard taper (e.g., a worn or modified spindle), we machine the collet to match your existing seat, not the catalog standard.
If your part has a hex cross-section and you are using a round collet with a shim, that is wasted time and scrap. A custom hex bore collet eliminates both.
Q: What is your minimum order quantity?
A: No MOQ. We make one prototype for testing, then you scale up. Prototype pricing is slightly higher per piece, but production pricing drops at 100, 500, and 1,000 pieces. We send a tiered quote with your drawing.
Q: How do you guarantee tolerance and quality?
A: We machine to ±0.005 mm on the bore and taper, then grind after hardening. Every piece is measured on a CMM, and the report is included. If a piece is out of spec, we replace it at no cost, including freight.
Q: What is your typical lead time?
A: Prototypes in 7–12 working days after drawing approval. Production runs of 500+ pieces in 15–20 working days. Heat treatment adds 2–3 days. We confirm the exact date in the quotation.
Q: Can you provide material certificates and heat treatment reports?
A: Yes. We supply mill certificates for raw material (chemical composition) and heat treatment reports (hardness, case depth, furnace log). All documents are in English and shipped with the goods.
Send your drawing
Send us your PDF or STEP file. We will check the hex size, taper angle, and slot geometry, then send a firm quote within 12 hours. Include your material preference and annual quantity—we will suggest the most cost-effective option.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China. Your custom CNC collet chuck is made in China, but it is measured, verified, and documented to your exact spec. No MOQ, no surprises. Send the drawing.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.