Custom CNC Collet Chuck Sets 15 20 25 32 | Precision Made in China
OpeningYour drawing defines the part. Our machines do the rest. We machine each collet chuck to your exact dimensions, then verify every critical feature before shipment. No surprises.At a glance: Tol
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our machines do the rest. We machine each collet chuck to your exact dimensions, then verify every critical feature before shipment. No surprises.
At a glance: Tolerance ±0.005 mm on bore and taper. Lead time 7–15 days. No MOQ. Material certs included.
Specifications
Parameter
Value
Available types
15, 20, 25, 32 (matching standard autolathe spindles)
Material options
65Mn spring steel, 20CrMnTi, 42CrMo, SUS440C
Hardness
45–52 HRC (after heat treatment)
Tolerance
±0.005 mm on bore, ±0.01 mm on taper angle
Surface finish
Ra 0.4 µm on gripping surface, Ra 0.8 µm elsewhere
Process
CNC turning, internal grinding, wire EDM slotting
Heat treatment
Oil quench + temper, batch controlled
Inspection
100% dimensional check, 5% CMM sampling
Batch size
1 piece to 10,000 pieces
Lead time
7 days for prototypes, 15 days for production runs
MOQ
None – we quote and run one piece
We use CNC lathes for the outer profile and bore, then internal grinders for the taper. Slotting is done on wire EDM for consistent width and zero burr. Each collet is serialized for traceability.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every heat treatment batch gets a unique code. We record hardness, tempering time, and final inspection results against that code. If you have a problem in the field, we trace it back to the exact batch and date. This is precision manufacturing with a paper trail.
2. Inspection report per batch. You get a dimensional report for every batch we ship. It lists bore diameter, taper angle, slot width, and hardness values. The report is signed by our QC lead and stamped. No generic "certificate of conformance" – you get real numbers.
3. One factory for CNC, stamping, springs, and heat sinks. Your collet chuck is not an isolated part. If your assembly also needs a stamped retainer ring, a compression spring for the chuck nut, or a heat sink for the motor drive, we make all of them under one roof. One purchase order, one quality standard, one shipping date. Fewer vendors, fewer delays.
Where these parts are used
These collet chucks are not shelf parts. They are made to fit specific autolathe spindles and workholding systems. Typical applications:
Swiss-type and sliding-head autolathes – gripping bar stock from 3 mm to 32 mm diameter during high-speed turning.
Multi-spindle automatics – replacing worn or out-of-spec collets to restore concentricity on production lines.
Secondary machining fixtures – holding pre-machined parts for drilling, milling, or thread rolling.
Replacement for OEM collets – when the original supplier cannot match your lead time or price, we reverse-engineer from your sample or drawing.
Buyers in automotive, medical device, and fastener industries use these collets daily. The 15 and 20 types fit smaller bar stock; the 25 and 32 types handle heavier cutting loads. All are ground after heat treatment to hold runout under 0.01 mm.
Q: What is the MOQ?
A: No MOQ. We make one piece or one thousand. The unit price drops with quantity, but we do not force you to buy more than you need. Many buyers order a single prototype to test fit, then scale up.
Q: How do you ensure tolerance and quality?
A: We grind the bore and taper after heat treatment. That is the only way to hold ±0.005 mm. We check every collet with a bore gauge and a taper ring gauge. Then we sample 5% on a CMM and include the report with your shipment.
Q: What is the lead time for a custom collet chuck?
A: Prototype (1–5 pieces): 7 days. Production (50+ pieces): 15 days. If you need faster, tell us – we can split the batch and air-freight the first pieces.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material and our own heat treatment report. We keep records for 10 years. If your customer requires full traceability, we add it at no extra cost.
Send your drawing
Send us your drawing or a sample part. We will quote firm within 12 hours. We do not guess – we measure, we calculate, we quote.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Your custom CNC collet chuck, made in China, machined to your numbers, verified before shipment. No MOQ, no minimums, no excuses.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.