Custom CNC Collet Chuck Machined to Drawing | BQUQ China Factory
OpeningYour drawing is the starting point. We machine your custom CNC collet chuck to that drawing, verify every critical dimension before shipment, and deliver a part that fits your spindle and holds
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing is the starting point. We machine your custom CNC collet chuck to that drawing, verify every critical dimension before shipment, and deliver a part that fits your spindle and holds your workpiece true.
At a glance: Tolerance ±0.005 mm on bore and taper, surface finish Ra 0.4, lead time 15 working days, no MOQ.
We are BQUQ, a precision manufacturing factory in Dongguan, China. Twenty years of CNC machining, metal stamping, springs, and heat sinks. One factory, four lines, full control.
Carburized and hardened to HRC 58–62 (case depth 0.8–1.2 mm), or induction hardened
Grinding
Cylindrical and internal grinding after hardening
Bore tolerance
H6 or tighter, verified with air gauge
Taper tolerance
AT3 or better, checked with taper ring gauge
Concentricity
≤ 0.005 mm TIR between bore and taper
Surface finish
Ra 0.4 on sealing and locating faces, Ra 0.8 elsewhere
Threads
Class 2A/2B or custom, thread gauged
Balancing
G2.5 or better, dynamic balancing available
Batch size
1 piece to 10,000 pieces, no MOQ
Inspection
100% critical dimensions, CMM report per batch
Lead time
15 working days for prototypes, 20–25 days for production runs
Packaging
Anti-rust oil, individual foam wrap, export wooden case
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every chuck gets a unique serial number. We record material heat number, heat treatment furnace log, and grinding machine parameters. If a problem appears in your line, we trace it to the exact batch and process step. No guesswork.
2. Inspection report per batch. You get a dimensional report with every shipment. Bore diameter, taper angle, concentricity, runout, hardness—all measured and documented. We use CMM, air gauges, and hardness testers calibrated to ISO standards. The report is not a formality; it is your proof of compliance.
3. One factory for CNC + stamping + spring + heat sink. Your chuck is not an isolated part. It works with springs, clamps, and heat dissipation components. We make all of them under one roof. Fewer suppliers, shorter lead times, and no finger-pointing when something does not fit. You send one drawing package; we coordinate the rest.
Where these parts are used
Custom CNC collet chucks are not shelf items. They are engineered for specific spindles and workpieces.
Swiss-type lathes and sliding headstock machines. The chuck holds bar stock with sub-micron repeatability for long, slender parts.
Multi-spindle automatic lathes. High clamping force and fast actuation for cycle times under 10 seconds.
Grinding machines. A collet chuck that holds a ground shaft without marking it is critical for final finishing operations.
Medical device manufacturing. Small titanium and stainless parts need a chuck that does not distort thin walls.
Aerospace and automotive. High-volume production of valve bodies, fuel injectors, and fasteners where runout is a rejection criterion.
Tool and die shops. Replacing worn or non-standard chucks with a custom bore that matches a legacy spindle.
In every case, the chuck is a precision manufacturing component. It is the interface between the machine spindle and the workpiece. If it is wrong, nothing downstream is right.
Q: What is your MOQ?
A: No MOQ. We machine one prototype or 10,000 pieces at the same quality level. Prototype pricing is higher per piece, but tooling and setup are the same. You pay for what you need.
Q: How do you guarantee tolerance and quality?
A: We inspect 100% of critical dimensions on every chuck. Bore and taper are air-gauged. Concentricity is checked on a precision mandrel. A CMM report is included with each batch. If a dimension is out of spec, we do not ship it. We reject it at our cost, not yours.
Q: What is your lead time for a custom CNC collet chuck?
A: Standard lead time is 15 working days for prototypes after drawing approval. Production runs of 500 pieces or more take 20–25 working days. If you need faster, tell us. We can split the batch or run overtime, but we will not skip inspection.
Q: Do you provide material certificates and heat treatment reports?
A: Yes. Every batch comes with a material certificate from the mill and a heat treatment report showing hardness and case depth. If you require third-party testing, we arrange it at cost. No extra markup.
Send your drawing
Send us your drawing and your spindle details. We will check the bore, taper, and clamping force requirements. You get a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a custom CNC collet chuck factory made in China, but we ship to 30 countries. Your drawing is safe with us. Your quote is free. Your time is not wasted.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.