Precision CNC Machined 5C Collet Set | Custom Sizes, No MOQ
OpeningYour 5C collet set starts as a drawing, not a stock number. We machine each collet to your exact bore diameter, step, and slot geometry. Before shipment, every piece is verified on a CMM and ma
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your 5C collet set starts as a drawing, not a stock number. We machine each collet to your exact bore diameter, step, and slot geometry. Before shipment, every piece is verified on a CMM and matched against your print.
This is precision manufacturing for lathe work that cannot tolerate runout.
Tolerance: ±0.005 mm on bore ID
Lead time: 7–12 days for standard sets, 15 days for custom profiles
No MOQ: order one collet or a full set
Material: 8620 case-hardened steel or 12L14 free-cutting steel
Made in China, shipped worldwide from our Dongguan factory
Specifications
Parameter
Value
Material
8620 (case-hardened to 58–62 HRC) or 12L14 (as-machined)
Bore tolerance
±0.005 mm (0.0002 in)
Concentricity (TIR)
≤0.010 mm at nose, ≤0.015 mm at 25 mm depth
Surface finish
Ra 0.4 µm on bore, Ra 0.8 µm on OD
Slots
Ground, width ±0.02 mm, no burr
Hardness
58–62 HRC case depth 0.3–0.5 mm
Machines
5-axis CNC lathes, cylindrical grinders, wire EDM for slots
Inspection
100% CMM check on bore, TIR, and slot width
Batch size
1 to 5,000 pieces, same process control
Marking
Laser-etched size, batch code, date
We do not use cast blanks. Each collet is turned from solid bar, ground on the OD and bore, then wire-cut for the expansion slots. This gives you repeatable clamping force across the entire set.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every collet gets a batch code. That code links to the heat number, machine operator, and inspection data. If a problem shows up on your line, you can trace it back to the exact bar stock and shift. No guesswork.
2. Inspection report per batch.
You get a PDF with actual measured values for every critical dimension—bore ID, TIR, slot width, hardness. Not a generic certificate. Real numbers from a calibrated CMM, signed by our QC lead.
3. One factory for CNC + stamping + spring + heatsink.
Your collet chuck might need a stamped retainer ring, a spring for the drawbar, or a heatsink for the spindle motor. We make all of those in-house. One purchase order, one shipping date, one quality standard. You skip the headache of coordinating three suppliers.
Where these parts are used
Custom 5C collets are not just for manual lathes. They go into:
CNC lathe turrets with quick-change collet chucks, holding bar stock from 1 mm to 25 mm diameter.
Swiss-type screw machines where runout below 0.010 mm is mandatory for medical bone screws or watch pinions.
Secondary operations on milled parts—using a 5C collet block on a vertical mill to drill cross-holes.
High-speed spindle workholding for toolroom prototypes, where you need a different bore size every week.
Automated cells with bar feeders, where collet ID wear is tracked and replaced on a schedule.
In each case, the collet is the last thing between the spindle and the part. If it is off, nothing else matters.
Q: What is your MOQ for a custom 5C collet set?
A: No MOQ. Order one collet for a trial, or a full set of 20. The unit price drops with quantity, but the tolerance and inspection are identical.
Q: How do you guarantee tolerance and quality?
A: We hold ±0.005 mm on bore ID. Every collet is measured on a CMM, and we send you the report. If a collet fails your incoming inspection, we replace it at no cost—no return shipping needed.
Q: What is your lead time for a custom size?
A: 7–12 days for standard 5C profiles (round, hex, square). Custom slot patterns or special step bores take 15 days. We ship via DHL or FedEx, door-to-door.
Q: Can you provide material certificates?
A: Yes. We supply EN 10204 3.1 mill certificates for the bar stock, plus our own hardness and case-depth reports. All from the batch code on the collet.
Send your drawing
Send us your 5C collet drawing—PDF, STEP, or even a hand sketch with dimensions. We will reply with a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a 20-year precision manufacturing factory in Dongguan, China. CNC machining, stamping, springs, and heatsinks under one roof. No MOQ, no minimum order value, no runaround. Just a quote you can build a cost model on.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.