OpeningYour drawing defines the part. We machine it. Then we verify it before shipment.This is a W20 Schaublin collet chuck, machined to your exact geometry. We hold concentricity within 0.005 mm TIR.
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We machine it. Then we verify it before shipment.
This is a W20 Schaublin collet chuck, machined to your exact geometry. We hold concentricity within 0.005 mm TIR. Surface finish down to Ra 0.4 µm on the taper.
Tolerance: ±0.005 mm on critical diameters
Lead time: 7–12 working days for prototypes
No MOQ: order one piece or one thousand
Material: 20CrMnTi, 42CrMo4, or 9Cr18 stainless
Inspection: 100% dimensional check, report included
We are a precision manufacturing factory in Dongguan, China. CNC machining is our core line, backed by 20 years of tooling experience.
Every chuck is ground after heat treatment. We do not skip steps. The taper is checked with a calibrated W20 gauge before the part leaves the shop.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique job number. Material heat number, machine operator, and inspection records are linked to that number. If you need to trace a part back to its raw bar stock, we can do that in minutes.
2. Inspection report per batch.
You receive a dimensional report for every batch, not just a sample. CMM data, taper contact percentage, and hardness values are listed. No surprises at your incoming QC.
3. One factory for CNC, stamping, springs, and heat sinks.
Your collet chuck might need a spring collet, a stamped retainer, or a heat sink adapter. We make all of them under one roof. Fewer suppliers, shorter lead times, simpler logistics.
Where these parts are used
Custom CNC collet chucks are not shelf items. They are made for specific spindles and specific jobs.
Swiss-type lathe main spindles and sub-spindles
Precision grinding spindles for toolroom use
Indexing heads on CNC milling centers
High-speed rotary transfer machines
Replacement chucks for aging European machines where original parts are discontinued
Buyers usually send us a worn original part or a spindle drawing. We reverse-engineer the taper and thread, then machine a replacement that fits without modification.
Q: What is your MOQ?
A: No MOQ. We machine one prototype for fit testing, then scale to your volume. Many buyers start with a single piece to verify taper contact.
Q: How do you guarantee tolerance and quality?
A: We grind the taper and OD after heat treatment. Each part is checked with a W20 master gauge and a CMM. The inspection report is included with the shipment. If a part fails, we remake it at no cost.
Q: What is your lead time for custom CNC collet chucks?
A: 7–12 working days for prototypes, depending on material and heat treatment. Production batches of 100+ pieces typically ship in 15–20 working days. Air freight is available if you need it faster.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw material, heat treatment reports, and hardness test results. All documents are in English and can be notarized if your customer requires it.
Send your drawing
Get a firm quote within 12 hours.
Email your drawing to sc@bquq.com or message us on WhatsApp at +86 13713157787.
Include your target quantity, material preference, and required tolerance. We will reply with a price, lead time, and a technical review of your design.
Precision manufacturing is our daily work. Custom CNC collet chucks made in China, with no MOQ and full traceability. Send the drawing. We will handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.