-
English
- sc@bquq.com
Cam piercing and cam forming let a stamping die cut and bend on angles a straight press cannot reach. BQUQ explains cam design rules and quotes in 12 hours.
How stamped reed switch and sensor parts are made: tolerances, plating, blade alignment and inspection. BQUQ quotes in 12 working hours from one ISO9001 factory.
Hydraulic vs mechanical stamping presses compared: tonnage, speed, stroke control, cost and which suits your part, from BQUQ, a Dongguan factory.
Stamped metal heat shields protect sensors, wiring and plastics from radiant heat. BQUQ covers material choice, emissivity, standoff and mounting options.
Die pilots and strip guidance set the accuracy of every stamped part. BQUQ explains pilot types, clearance and strip lift for progressive dies in Dongguan.
Stamped pins and terminals for press-fit and solder joints: material, plating, insertion force and tolerances from BQUQ, a Dongguan ISO9001 source factory.
A practical FAI checklist for stamped parts: dimensions, burrs, material certs, tool marks and capability data. BQUQ quotes in 12 working hours.
Compare stamping in China vs local suppliers on landed cost, tooling, lead time and risk. BQUQ quotes in 12 working hours from one ISO9001 factory.
Design guide to stamped locking washers and retainers: tooth geometry, preload, materials, tolerances and DFM rules. BQUQ quotes in 12 working hours.
How stamping unit cost falls with volume: tooling, setup and run-rate economics at 10k, 100k and 1M parts. BQUQ, a Dongguan source factory. Quote in 12 hours.
Stamping 0.1 mm and thinner strip: material, die clearance, feeding and burr control. BQUQ, a Dongguan source factory, runs precision thin-gauge stamping. 12-hour quotes.
Stamped cable clamps, shields and grounding contacts: design, materials and termination. BQUQ, a Dongguan ISO9001 source factory. Quote within 12 hours.
Stamping tooling lead time explained by a China source factory: design, machining, tryout and first article. BQUQ builds progressive dies. Quote in 12 hours.
Plating, anodizing, passivation and tumbling for stamped parts: cost, thickness and corrosion performance. BQUQ, a Dongguan source factory. Quote in 12 hours.
Stamped connector shells from a Dongguan source factory: mating tolerances, shielding design, plating and tooling. BQUQ holds ±0.05 mm. Quote in 12 hours.
