Precision CNC Collet Chuck & Nut | Custom Made in China | BQUQ
OpeningYour ER8 collet chuck starts as a drawing, not a stock photo. We machine it from solid bar stock or forging, cut the threads to class 2A/2B, and grind the taper to a guaranteed 0.005 mm TIR. Ev
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your ER8 collet chuck starts as a drawing, not a stock photo. We machine it from solid bar stock or forging, cut the threads to class 2A/2B, and grind the taper to a guaranteed 0.005 mm TIR. Every unit is verified on a CMM before it ships from our Dongguan factory.
At a glance: Tolerance ±0.005 mm on taper, surface finish Ra 0.4 µm, lead time 7-12 days, no MOQ, full material traceability.
2A (external), 2B (internal), single-point cut or ground
Surface finish
Ra 0.4 µm on taper, Ra 0.8 µm on OD
Machining process
CNC turning, milling, grinding, wire EDM for slots
Inspection
CMM full report, hardness test, magnetic particle check
Batch size
1 to 10,000 pieces
Marking
Laser engraving (material, heat code, batch no.)
Packaging
VCI paper + foam insert, export carton
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each heat number is recorded. Each batch gets a unique code. If a problem appears in your assembly line, we trace it to the exact machine, operator, and material lot. No guesswork.
2. Inspection report per batch. You get a dimensional report with actual measured values, not a "pass/fail" checkbox. Taper angle, runout, thread pitch, hardness — all listed. We keep the raw data for 5 years.
3. One factory for CNC + stamping + spring + heatsink. Your collet chuck might need a spring collet, a stamped retainer, or a heatsink for a spindle motor. We make all four in the same building. One purchase order, one quality system, one shipping date. You save 2-3 weeks of supplier coordination.
Where these parts are used
Custom CNC collet chucks are not shelf items. They go into:
Swiss-type lathes — ER8 collets hold small-diameter stock (1-7 mm) for medical bone screws, watch pins, and dental implants.
Tool presetters — precision collet nuts for holding reference tools during measurement.
Automated pallet systems — where a chuck must repeat within 0.005 mm across thousands of cycles.
PCB drilling spindles — ER8 collets for micro-drills (0.3-3 mm) in high-speed spindles up to 60,000 RPM.
Custom fixturing — when a standard ER chuck does not fit the machine spindle nose, we machine the mounting flange to your taper or bolt pattern.
We also make the matching collet nuts with special drive slots, extended lengths, or non-standard hex shapes. If you have a worn-out chuck from a German or Japanese machine, send us the sample. We reverse-engineer it and improve the hardness.
Q: What is your MOQ?A: No MOQ. We make one piece for prototype validation and 10,000 pieces for production. The price per piece drops with quantity, but the first article is always machined and inspected the same way.
Q: How do you guarantee tolerance and quality?A: We grind the taper on a cylindrical grinder with in-process gauging. Then we check every critical dimension on a CMM. The inspection report is included with the shipment. If any dimension is out of spec, we replace the part at no cost — including freight.
Q: What is the lead time for a custom CNC collet chuck?A: Standard ER8 collet chuck with nut: 7 days. Custom taper or thread: 10-12 days. For urgent breakdowns, we can rush a single piece in 72 hours at a 30% surcharge. We run two shifts, so your job is not waiting for a machine to free up.
Q: Can you provide material certificates and heat treatment reports?A: Yes. We supply mill certificates for the raw material and a heat treatment report with hardness curves. For aerospace or medical applications, we also provide a full chemical composition analysis from an independent lab.
Send your drawing
Send us your 2D drawing or 3D model in STEP, IGES, or PDF. We reply with a firm quote in 12 hours — price, lead time, and tolerance review. No obligation, no design fee for standard modifications.
Email: sc@bquq.com WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ and no excuses. Your drawing is our work order.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.