Your drawing becomes a finished collet chuck. We machine it, heat-treat it, grind it, and verify it before shipment. Every unit is checked against your print. No excep
Your drawing becomes a finished collet chuck. We machine it, heat-treat it, grind it, and verify it before shipment. Every unit is checked against your print. No exceptions.This is a cust
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
## Opening Your drawing becomes a finished collet chuck. We machine it, heat-treat it, grind it, and verify it before shipment. Every unit is checked against your print. No exceptions.
This is a custom CNC collet chuck for auto lathe 18-type machines. The round bore is machined to your specified diameter. We hold concentricity and bore tolerance consistently.
## Specifications We run this part on our own CNC lathes and grinding machines. The factory has 20 years of precision manufacturing experience. All processes are in-house, from turning to heat treatment to final OD/ID grinding.
| Parameter | Value |
|---|---|
| Material options | 20CrMnTi, 65Mn, 9SiCr, or per drawing |
| Hardness (after heat treat) | 58–62 HRC |
| Bore diameter range | 3 mm – 60 mm (custom per drawing) |
| Bore tolerance | ±0.005 mm (0.0002") |
| Concentricity (TIR) | ≤0.01 mm (0.0004") |
| Surface finish (bore) | Ra 0.4 µm or better |
| Surface finish (OD) | Ra 0.8 µm |
| Keyway/slot tolerance | ±0.01 mm |
| Batch size | 1 to 100,000+ |
| Inspection | 100% dimensional check, report per batch |
| Lead time | 15 days for prototypes, 20 days for production |
| MOQ | None |
We use CNC turning, internal grinding, and surface grinding. Slots and keyways are cut on wire EDM or CNC milling. Heat treatment is done in controlled atmosphere furnaces. Every collet chuck is serialized for traceability.
## Three reasons buyers send us their drawings 1. Batch-traceable quality. Each batch gets a unique number. We record material heat numbers, machine parameters, and inspector ID. If you have a problem six months later, we can trace it back to the exact shift and tool.
2. Inspection report per batch. You get a full dimensional report with every shipment. Bore diameter, TIR, hardness, surface finish—all measured and recorded. No vague certificates. Real numbers from calibrated instruments (Mitutoyo, Tesa).
3. One factory for CNC + stamping + springs + heat sinks. You send us one drawing package. We handle the collet chuck, plus any stamped washers, springs, or heat sinks in the same assembly. Fewer suppliers, fewer logistics headaches, one responsible party. This is why buyers choose us for precision manufacturing projects that need multiple processes.
## Where these parts are used This custom CNC collet chuck is for auto lathes (18-type) in high-volume turning operations. Typical applications:
The 18-type designation means it fits standard auto lathe spindles. We match the taper and thread to your machine. Send us your spindle drawing if you are unsure.
## Questions buyers ask before ordering Q: What is the MOQ? A: No MOQ. We make one prototype for you to test, or 50,000 for production. The price per piece drops with quantity, but the quality standard does not change.
Q: How do you guarantee tolerance and quality? A: We grind the bore and OD after heat treatment. Every part is measured on a CMM or with air gauges. The inspection report is included in the shipment. If a part is out of spec, we replace it at no cost.
Q: What is the lead time? A: 15 days for prototypes (1–10 pcs). 20 days for production batches. We can rush orders to 10 days for an extra fee, depending on material availability.
Q: Do you provide material certificates? A: Yes. We supply mill certificates for the raw material, heat treatment reports, and hardness test results. All documents are in English and traceable to the batch number.
## Send your drawing We quote within 12 hours. Send your PDF or STEP file. We will confirm material, tolerance, and price. No MOQ, no hidden fees.
Email: sc@bquq.com WhatsApp: +86 13713157787
Your custom CNC collet chuck, made in China, verified before shipment. Send the drawing today.
Looking for a different part? We also machine Custom CNC Collet Chuck Precision Manufacturing Made in China No MOQ in the same Dongguan factory.
| Parameter | Capability |
|---|---|
| Materials | AL6061/7075, SUS303/304/316, 45# steel, T2 copper, H59 brass, POM, PEEK, nylon |
| Tolerance | ±0.005mm standard, ±0.003mm on request |
| Machines | 3/4/5-axis CNC, turn-mill, Swiss lathe |
| Surface | Anodizing, nickel, zinc, passivation, sandblast, polish |
| Size Range | Max 400 x 300 x 200 mm |
| Prototype | 72 hours, no MOQ on samples |
| Inspection | Full report per batch, CMM data on request |
