OpeningThis is a CNC machined auto lathe 36 type collet chuck, external thread, rear closeup. We make it to your drawing. Not from a catalog. Not from a stock photo.Every unit is verified before shipm
This is a CNC machined auto lathe 36 type collet chuck, external thread, rear closeup. We make it to your drawing. Not from a catalog. Not from a stock photo.
Every unit is verified before shipment. We check thread pitch, taper angle, and concentricity on each piece. If it does not pass, it does not ship.
This is precision manufacturing for people who measure twice. If you need a drop-in replacement or a custom variant, send the drawing. We will quote it.
| Parameter | Value |
|---|---|
| Type | 36 type collet chuck, external thread rear |
| Thread size | M36 × 1.5 (or custom per drawing) |
| Collet taper | 16° included angle (standard) |
| Material | 20CrMnTi, 40Cr, or 65Mn spring steel |
| Hardness | Case-hardened HRC 58–62, core HRC 35–40 |
| Tolerance | ±0.005 mm on bore and thread, ±0.01 mm on OD |
| Concentricity | ≤0.003 mm TIR at nose |
| Surface finish | Ra 0.4 μm on taper, Ra 0.8 μm elsewhere |
| Coating | Black oxide, phosphate, or zinc-nickel |
| Process | CNC turning, CNC milling, thread grinding, heat treatment |
| Inspection | 100% thread gauge check, CMM on taper, batch report |
| Batch size | 1 to 10,000 pieces, no MOQ |
| Lead time | 15 days for prototypes, 20 days for production |
We run these on Citizen and Star Swiss lathes for the body, then grind the taper on a Studer. Heat treatment is done in-house in a vacuum furnace. This gives us control over distortion. We do not outsource critical steps.
1. Batch-traceable quality. Each batch gets a heat number and a work order number. If a part fails in your machine, we can trace it back to the exact heat treatment cycle and tooling setup. We keep records for 10 years.
2. Inspection report per batch. You get a full dimensional report with every shipment. It lists thread pitch, taper angle, hardness, and concentricity. No surprises. No "we checked it, trust us." You see the numbers.
3. One factory for CNC + stamping + spring + heatsink. We run four production lines under one roof. If your collet chuck goes into an assembly that also needs a stamped bracket, a compression spring, or a heat sink, we make all of it. One purchase order. One quality system. One freight bill. This cuts your supplier management time in half.
A 36 type collet chuck with external thread rear is not a generic part. It is used where spindle speed and repeatability matter.
In all these cases, the collet chuck is the interface between the spindle and the workpiece. If it flexes, your part is scrap. We make it rigid.
Looking for a different part? We also machine Custom CNC Collet Chuck Sets 15 20 25 32 | Precision Made in China in the same Dongguan factory.
Q: What is your MOQ? A: No MOQ. We make one piece for a prototype or 10,000 for production. The per-piece price drops with quantity, but we do not turn away a single-piece order.
Q: How do you guarantee tolerance and quality? A: We grind the taper after heat treatment, not before. We check 100% of threads with a go/no-go gauge. We measure concentricity on a CMM. You get a batch inspection report with the shipment. If a part is out of spec, we replace it at our cost.
Q: What is your lead time for a custom CNC collet chuck? A: 15 days for a prototype, 20 days for production runs. If you need it faster, tell us. We can split the batch and ship partial quantities.
Q: Do you provide material certificates? A: Yes. Every batch comes with a mill certificate for the raw material and a heat treatment report. If you need third-party testing, we can arrange it at cost.
We give you a firm quote in 12 hours. Not a "budget estimate." A real price based on your material, tolerance, and quantity.
Email your drawing to sc@bquq.com or message us on WhatsApp at +86 13713157787.
We are a precision manufacturing factory in Dongguan, China, with 20 years of experience. Your custom CNC collet chuck, made in China, verified before shipment, no MOQ. Send the file. Get the price.
| Parameter | Capability |
|---|---|
| Materials | AL6061/7075, SUS303/304/316, 45# steel, T2 copper, H59 brass, POM, PEEK, nylon |
| Tolerance | ±0.005mm standard, ±0.003mm on request |
| Machines | 3/4/5-axis CNC, turn-mill, Swiss lathe |
| Surface | Anodizing, nickel, zinc, passivation, sandblast, polish |
| Size Range | Max 400 x 300 x 200 mm |
| Prototype | 72 hours, no MOQ on samples |
| Inspection | Full report per batch, CMM data on request |
