OpeningYour drawing defines the part. Our job is to hold that tolerance and prove it. We machine auto lathe collets and guide bushing sets to your exact geometry, from material sel
Custom CNC Machined Auto Lathe Collet With Guide Bushing Set | BQUQ
OpeningYour drawing defines the part. Our job is to hold that tolerance and prove it. We machine auto lathe collets and guide bushing sets to your exact geometry, from material selection to final surf
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our job is to hold that tolerance and prove it. We machine auto lathe collets and guide bushing sets to your exact geometry, from material selection to final surface finish. Every set is verified before shipment—no exceptions.
Tolerance: ±0.005 mm on bore and taper
Lead time: 10–15 working days for prototypes, 7–10 for repeats
No MOQ—order one set or a thousand
Material: AISI 4140, 8620, or your specified alloy
100% dimensional inspection report included per batch
Specifications
Parameter
Value
Material
AISI 4140, 8620, 12L14, SUS303, or per drawing
Hardness
58–62 HRC (case-hardened), core 28–32 HRC
Process
CNC turning, grinding, wire EDM for slots
Tolerance
±0.005 mm on bore, ±0.01 mm on OD
Surface finish
Ra 0.4 µm on taper, Ra 0.8 µm elsewhere
Concentricity
≤0.005 mm TIR between bore and taper
Guide bushing OD tolerance
±0.002 mm for press-fit applications
Batch size
1 to 10,000 pieces
Inspection
CMM report, air gauge, and optical comparator per batch
Lead time
10–15 days prototype, 7–10 days repeat
We run these on Citizen and Star sliding-head lathes with in-process gauging. Grinding is done on Studer and Junker machines for the final taper and bore. Slots are cut via wire EDM to avoid burrs and maintain edge sharpness.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each heat lot is logged. Hardness, case depth, and plating thickness are recorded per batch. If a problem shows up in your line, we can trace it to the exact operation and shift.
2. Inspection report per batch. You get a full report—CMM points, air gauge readings, and surface finish values. No generic certificates. We measure what matters for a collet: bore diameter, taper angle, and concentricity.
3. One factory for CNC, stamping, springs, and heat sinks. Your collet set might need a spring collet, a stamped retainer, or a heat sink for the spindle. We make all of them under one roof. Fewer suppliers, fewer handoffs, fewer excuses.
Where these parts are used
Custom CNC collet chucks with guide bushings are standard in Swiss-type lathes and automatic screw machines. You will find them in:
Medical device manufacturing—small-diameter bone screws, dental implants, and surgical pins
Electronics—connector pins, contact probes, and micro-shafts
Automotive—fuel injector needles, valve guides, and precision fasteners
Aerospace—rivets, bushings, and small hydraulic fittings
The guide bushing supports the bar stock right at the cutting zone. That means you can hold tight tolerances on long, slender parts without deflection. Our sets are used in high-volume production lines where downtime costs more than the tooling.
Q: What is the minimum order quantity?
A: No MOQ. We machine one prototype set or 10,000 pieces at the same tolerance. Tooling and setup are the same; only the cycle time changes.
Q: How do you guarantee tolerance and quality?
A: We use in-process gauging during grinding and a final CMM inspection on every batch. The report is included with shipment. If a part is out of spec, we replace it at no cost, including freight.
Q: What is your lead time for a custom CNC collet chuck?
A: Prototypes ship in 10–15 working days after drawing approval. Repeat orders are faster—7–10 days—because we keep tooling and programs on file.
Q: Can you provide material certificates and heat treatment reports?
A: Yes. We supply mill certificates for raw material and a hardness report for each heat treatment batch. If you need third-party testing, we can arrange it at cost.
Send your drawing
Send us your 2D or 3D file. We will review the geometry, suggest material and hardness if needed, and give you a firm quote within 12 hours. No guesswork, no hidden costs.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing made in China, with no MOQ and a real inspection report on every batch. Your drawing is the starting point. We handle the rest.
