Custom CNC Machined Aircraft Brackets | Precision Manufacturing No MOQ
OpeningSend us your drawing. We machine the bracket exactly to your print. Every part is verified before shipment. No guesswork. No surprises.Tolerance: ±0.005 mm (0.0002 in) on critical featuresLead
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
3-axis & 5-axis CNC mills, CNC lathes with live tooling
Tolerance
±0.005 mm standard; ±0.002 mm on request
Surface finish
Ra 0.8 µm as machined; anodizing, alodine, passivation available
Max part size
800 mm x 600 mm x 400 mm (31.5" x 23.6" x 15.7")
Batch size
1 – 50,000+ pieces
Inspection
CMM, optical comparator, surface roughness tester
Certifications
ISO 9001:2015, material certs (EN 10204 3.1)
Lead time
Prototype 5 days, production 10–15 days
We hold tight tolerances on thin walls and complex 5-axis geometry. Our machinists have 20 years of average experience. We use new tooling for every critical dimension.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique job number. Material heat numbers are recorded. Tool paths are archived. If you need to trace a part back to its raw bar stock, we can do it in minutes.
2. Inspection report per batch.
You get a full dimensional report with every shipment. CMM data on all critical features. Surface finish readings. Material certs. No extra charge. No asking – it’s automatic.
3. One factory for CNC + stamping + springs + heat sinks.
Your aircraft bracket might need a stamped cover, a spring clip, or a heat sink bonded to it. We do all four processes under one roof. You save shipping costs, lead time, and vendor management headaches. One PO, one invoice, one responsible party.
Where these parts are used
Our CNC machined aircraft brackets go into real flying machines. Common applications:
Avionics racks – thin-wall aluminum brackets for radar and communication units, requiring tight flatness
Actuator brackets – stainless steel parts for flight control linkages, toleranced to ±0.01 mm
Interior fittings – seat track brackets, overhead bin hinges, galley supports in 6061-T6
Drone frames – lightweight titanium arms and motor mounts for UAVs, balancing strength and weight
We also machine brackets for ground support equipment, helicopter cargo hooks, and missile guidance housings. If it flies, we’ve likely machined a bracket for it.
Q: What is your MOQ?
A: No MOQ. We run one-piece prototypes and 50,000-piece production runs with the same quality system. Prototype pricing is slightly higher per piece to cover setup, but tooling is yours to keep.
Q: How do you guarantee tolerance and quality?
A: We use in-process probing on the machine. Every critical dimension is verified on a CMM after machining. We send you the inspection report with the shipment. If any dimension is out of spec, we re-machine or refund – your choice.
Q: What is your lead time for custom CNC machining?
A: Standard aluminum brackets ship in 7–10 days. Titanium or stainless takes 10–15 days. Rush orders (3–5 days) are available at a 20% surcharge. We quote exact lead time with your drawing.
Q: Can you provide material certificates?
A: Yes. We supply EN 10204 3.1 material certs for aluminum, stainless, and titanium. Mill test reports are included free with every batch. For aerospace grades, we can also provide heat treat and conductivity reports.
Send your drawing
Get a firm quote in 12 hours. No vague estimates. We read your print, check the geometry, and send you a fixed price per piece with lead time.
Email your drawing to sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your brackets, machined right.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.