Custom CNC Machined PCB Fixtures and Jigs | Precision Manufacturing
OpeningYour PCB fixtures and jigs are machined to your exact drawing. We verify every dimension before shipment. No shortcuts. No surprises.We run a 20-year-old precision manufacturing facility in Don
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your PCB fixtures and jigs are machined to your exact drawing. We verify every dimension before shipment. No shortcuts. No surprises.
We run a 20-year-old precision manufacturing facility in Dongguan, China. Our CNC lines handle aluminum, steel, stainless, and engineering plastics. You send the drawing. We return a part that fits your tester, your probe pins, and your production schedule.
Tolerance: ±0.005 mm (CNC milling), ±0.01 mm (turning)
Lead time: 7–12 days for standard fixtures
No MOQ – order one piece or one thousand
Inspection report included with every batch
Surface finish: 0.8 µm Ra as standard, 0.4 µm Ra available
7 days for prototypes, 12 days for production runs
Certifications
ISO 9001:2015, material certs (EN 10204 3.1) on request
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every fixture gets a unique serial number. We track material heat number, machine operator, tool path, and inspection result. If a problem appears on your line, we trace it back to the exact batch in minutes. You get a full traceability report with your shipment.
2. Inspection report per batch.
We don't just say "it's good." We prove it. Each batch ships with a dimensional inspection report. Critical features (hole positions, pin diameters, flatness) are measured on a CMM. You receive the actual measured values, not a pass/fail stamp. This is standard, not a paid extra.
3. One factory for CNC + stamping + springs + heat sinks.
Your PCB fixture often needs a metal bracket (stamping), a spring-loaded probe (springs), or a heat sink for burn-in tests. We make all of these in-house. One purchase order. One quality system. One shipping date. You save weeks of coordination and avoid tolerance stack-up between different suppliers.
Where these parts are used
Our CNC machined PCB fixtures and jigs are used in real production environments:
ICT (In-Circuit Test) fixtures – precision-machined aluminum base plates and probe plates with ±0.01 mm hole positions for pogo pins.
FCT (Functional Circuit Test) jigs – custom clamps, locators, and vacuum boxes for final board testing.
Programming fixtures – CNC-machined nests that hold boards flat for firmware flashing.
Burn-in test sockets – aluminum or stainless frames with heat sink mounting surfaces for high-power boards.
SMT solder paste inspection (SPI) pallets – machined from G10/FR4 or aluminum with tight flatness for optical alignment.
Wave solder pallets – high-temperature POM or polyimide fixtures that protect components during selective soldering.
Manual assembly jigs – simple but precise alignment pins, press-fit guides, and screw-driving nests.
In every case, the fixture is only as good as its machining. A 0.05 mm error in a probe hole means a false test failure. A warped base plate means inconsistent contact. We machine to the tolerance your tester needs, not the tolerance that's easiest for us.
Q: Is there a minimum order quantity?
A: No MOQ. We machine one prototype fixture for you to validate, then scale to hundreds or thousands. Many buyers start with a single unit for a new product launch.
Q: How do you guarantee tolerance and quality?
A: We inspect every critical dimension with a CMM. The inspection report is included with your shipment. If any dimension is out of spec, we re-machine or refund – your choice. We've been doing this for 20 years; our repeat order rate is over 90%.
Q: What is your typical lead time?
A: 7 days for standard aluminum fixtures, 12 days for stainless or complex multi-axis parts. Rush service (3–5 days) is available for an additional charge. We ship worldwide via DHL, FedEx, or UPS.
Q: Can you provide material certificates?
A: Yes. We provide EN 10204 3.1 material certificates for aluminum, steel, and stainless. We also provide RoHS and REACH compliance documentation for materials used in electronics manufacturing.
Send your drawing
Send us your 2D drawing or 3D model (STEP, IGES, or PDF). We'll review the geometry, tolerances, and material. You get a firm quote within 12 hours – not a vague estimate.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China. Custom CNC machining is our core business. No MOQ, no minimum order value, no games. Send the drawing and see what a 20-year-old factory can do.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.