Custom CNC Machined Robot End Effectors | Precision Manufacturing China
OpeningYour robot is only as accurate as the tool it carries. We machine end effectors to your exact drawing—no redesigns, no substitutions. Every part is verified on a CMM before it leaves our floor.
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your robot is only as accurate as the tool it carries. We machine end effectors to your exact drawing—no redesigns, no substitutions. Every part is verified on a CMM before it leaves our floor. You get a component that bolts on and works.
We have run a precision manufacturing shop in Dongguan for 20 years. Our CNC lines handle the tight tolerances and complex geometries that grippers, vacuum cups, and sensor mounts demand.
Tolerance: ±0.005 mm (ISO 2768-fine on standard features)
Lead time: 7–15 days for prototypes, 15–25 days for production runs
ISO 9001:2015, material certificates, RoHS/REACH compliance
We run 32 CNC machines in-house. Five are 5-axis. That means we cut undercuts and compound angles in one setup, not three. Fewer setups mean better repeatability on your critical mounting faces.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each end effector gets a unique serial number. We track every tool path, every operator, every inspection reading back to the raw material lot. If a part fails in your field test, we can tell you exactly which batch it came from and what we measured. No guesswork.
2. Inspection report per batch.
You do not have to trust us. We send a full dimensional report with every shipment. It lists all critical features, measured values, and pass/fail against your GD&T. For production runs, we include SPC charts on key characteristics. Your incoming QC can skip the first-article inspection.
3. One factory for CNC + stamping + springs + heat sinks.
Your end effector often needs a spring-loaded jaw or a stamped mounting bracket. Or it needs a heat sink for a servo motor. We do all four processes under one roof. You get one RFQ, one supplier, one shipping point. No chasing four vendors across time zones. This cuts your procurement time by weeks.
Where these parts are used
Our CNC machined end effectors go into real production lines, not just prototypes.
Pick-and-place grippers for electronics assembly. We machine the finger profiles to hold 0402 components without crushing them.
Vacuum end effectors for packaging. We bore the venturi channels and thread the vacuum ports to your spec.
Welding torch mounts for robotic arms. We hold the torch angle to ±0.05° so your weld seam stays consistent.
Collaborative robot (cobot) tool changers for automotive lines. We machine the quick-release coupling faces to a flatness of 0.005 mm.
Inspection probes for metrology stations. We make the stiff, low-mass housings that keep your CMM repeatable.
Medical device handling in cleanrooms. We machine PEEK and 316L stainless parts that survive autoclaving.
These are functional parts. They see thousands of cycles per day. We design the machining strategy around fatigue life, not just cosmetic appearance.
Q: Do you really have no MOQ?
A: Yes. We run one-off prototypes daily. The setup cost is quoted separately, but the unit price stays fair. If you need 5 pieces for a pilot line, we do that. If you need 50,000 later, we scale up without re-quoting the design.
Q: How do you guarantee ±0.005 mm tolerance?
A: We machine to that tolerance on a 5-axis mill with thermal compensation. Then we verify on a CMM with a resolution of 0.0001 mm. If a feature is out of spec, we re-machine or scrap it. You get the report, not an apology.
Q: What is your typical lead time?
A: Prototypes ship in 7–15 days from drawing approval. Production runs of 100–1000 pieces ship in 15–25 days. We quote exact dates on your RFQ. Rush service is available for an additional charge.
Q: Can you provide material certificates?
A: Yes. We supply EN 10204 3.1 certificates for all metals. For aerospace or medical work, we can provide 3.2 certification with independent inspection. All materials are traceable to the mill.
Send your drawing
Stop waiting on slow quotes from multi-layer suppliers. Send us your STEP or PDF file. We will review the geometry, suggest machining improvements if needed, and send a firm quote within 12 hours.
We are a custom CNC machining factory made in China, but we operate on your schedule. No MOQ, no hidden tooling fees, no language barriers.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.